Hi all,
I have compiled the ble_app_hids_keyboard example for a nRF52832 on a Laird DVK-BL652 breakout board.
I have a tablet running android 5.1.1 and the nordic nRFConnect...
Hello All,
We are using nrf52840 board interface with wiznet550i.
We try to implement mqtt tls 1.2.we get following errors..
I get certificate verification error -0x2700...
Hi,
i am using SDK v8 with softdevice v8,using master control panel pc application,added custom service and characteristics to application,problem is characteristics value...
There is the board mark on the chip like n51822CEAAD01350A0, where DO is Build code, 1350 is tracking code(YYMM), A0 is lot code.
My question is how can I get those codes...
I'm trying to debug a randomly occuring Hardfault. In trying to trace down the source I read the CPU registers use the Nordic hardfault_implementation.c which grabs the register...
Dear nordic employee
my purpose is send a data the length is from 150 to 273
when my server device send data by sd_ble_gatts_hvx（the send length is fixed 10 bytes） ...
If I leave the CE pin in a HI state, and assuming I have the PWR_UP = 1 and have loaded the Tx FIFO with data, will the data be transmitted by merely setting PRIM_RX to a...
I've paired ble device with android and then device went out of range and wen ble device comes into range device will connect at that time do we get any callBack???
Hi,
I'm looking at increasing the sensor update rates for the Thingy:52, and get more frequent readings into the sample app. Let's assume I want to change the temperature...
I've been trying to use the Device Manager to store and recall bonding information for use in whitelists. Unfortunately the dm_whitelist_create function always seems to return...
I have recompiled the secure boot loader, s132 and it works great on the dev board but not on my board. The difference in boards is minimal with the exception of the fact...
Hello Everyone,
I have a basic question related to custom BLE service 128-bit UUID.
I know the custom ble service base UUID is the "00000000-0000-1000-8000-00805F9B34FB...
Hello,
We are trying to change Connection Interval when both of Central and Periphera become Sleep mode and either of them becomes Active mode to reduce Power Consumption...
Hello everyone,
My IC description: nRF51822 QFAAHO, which belongs to IC revision 3 and, as the PANv3.0 says, "1V2 + HFCLKarerequested always when the GPIOTE task is configured...
I am using nrf51822 with SDK12.3 + S130 as a BLE peripheral device. I want to pair it to multiple central devices and use button to switch between them.
I tried to filter...
I have designed my own custom PCB with nrf52832 . The schematics of my PCB is attached with this post.
I am programming the soft device hex file but not initializing it...
Hi,
I want to implement Server/Client model light switch where all nodes should receive the state from all.
How can we read the state of one client on another client...
I have custom hardware that is working fine. No issues. I can program, erase, debug with no issues. I have been working on making some changes in the bootloader, and I've...
