Hello Team,
I want to configure P2.07 as UART RX for my custom board.
But when I clear the already assigned property as led2 for this pins from the pin editor gui, I am...
Hi,
I am trying to adding a coded phy support on my device in NCS project.
once I added CONFIG_BT_CTLR_PHY_CODED =y in my config , the ROM size will add more than 7kB...
board : nRF5340
sdk-nrf : v2.7.99-cs2
Zephyr version: 3.6.99
I am following https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/app_dev/bootloaders_dfu/qspi_xip_split_image...
Hello Team,
We are working on custom board using nrf54l15 platform.
If we flash only application code, it works, LED is blinking & BLE advertises. But after adding DFU...
Hello!
I'm currently working with the nRF7002 Wi-Fi chip on a custom board. The MCU used is STM32H573ZIT6, and the software is Zephyr 4.0, specifically using the Wi-Fi shell...
After i asked this question , i changed to use SDK 8.0.0 hrs "s110_for_dfu",
As the same step to try,
i downloaded softdevice(s110) & bootloader(for 8.0.0)
then opened...
I want to set its registers by uart I/F.
Because our host cpu(ARM9) has no SWD I/F.
How can I set its registers by using uart I/F?
I read a document of "nRF51_Series_Reference_manual...
Hi,
Please help me...
This is the first We are launching our product which uses nRF51822 SOC, But I have no idea how do i write manufacturing test? or what are the tests...
Hello,
What I need to do is control a small 128x64px SSD1306 display with my beacon. Could anyone please give me some directions to follow? I tried this library but had...
Hi,
I am using nrf51822 for my application.
i want to recieve data from bluetooth over BLE ,can you explain me the process of receiving the data over UART.
I have modified the experimental_ble_eddystone app to be a connectable beacon. To do this I need to increase the peripheral_link_count to 1 from 0. In others words I want...
I have been having issue with BLE Connection that frequently and randomly disconnect due to timeout. When there is no disconnection, everything else has been working fine...
Hi
we are implementing a system where in an iOS app, we use the ranging functionality with iBeacons. We read device characteristics when the app is in background.
A...
Hello everyone,
I am trying to implement the button /timer interrupt handler function
Running Functionalities,
button(1) is pressed for 3 sec and button handler...
I am looking for the documentation for the SoftDevice S132 for nRF5283. Where can I find that?
I looked at some old links that are no longer valid.
Thanks
My boards are getting manufactured and now i realised that:
I'm using lfclk crystal oscillator part no#: ST2012SB32768E0HPWBB is having power rating of 0.5μW, where as...
Hi，I have a question.
the PCA10005 board's P0.17(Or other pins) connected to 2.8 v voltage,but the Vcc is not connected,and the PCA10005 GND connect to 2.8V GND.The PCA10005...
Hi,
I'm using the S110 v7.10 to implement a service with an RACP, amongst other things. I'm supporting multiple transmissions per connection interval. This is working fairly...
i have nrf51422 v2 and it can use s110 v7.x.x
and when i go to download s110 v7.x.x but there is nothing for nrf51422 v2
softdevice s110 v7.x.x is for nRF51822...
