I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
I use nRF52840 and SDK16 with S140 softdevice. I need 3 ADC ports. The initial code as follows.
static void adc_configure(void) { ret_code_t err_code = nrf_drv_saadc_init...
Hi,
I add a my .ilb file in the ses project .When I c all the function in the .lib file and build, it will have an log "undefined reference to 'xxxx'". But i can success...
I want to upgrade a BLE peripheral firmware (nrf52840) by using another nrf52840 as BLE central.
Do you have any idea how I can do that?
I know how to use android to upgrade...
Dk 0.8.5 with external GPS antenna modem FW: v1.1.1 nrf tag: v1.2.0 supl: v0.5.1 OS: Windows10
Put supl folder to "\ncs\nrf\ext\lib\bin\supl" * the path written in readme...
Hi,
I have a problem where I have to put a delay for 50 us after nrf_drv_rtc_counter_clear(&rtc); to get 0 counter from nrf_drv_rtc_counter_get(&rtc);
seems that the...
How to extract MQTT message from the Simple_MQTT sample for nrf9160-DK?
I am trying to use a specific message to trigger an action based on a predefined string. Not sure...
Hi,
As far as I understand, every connection establishment has to start with advertising.
Event if I have already connected and bonded to a peer, after disconnection...
Hi everyone,
I am using an nRF52840 dongle (MakerDiary) with SDK15.0 & SoftDevice S140 v6.0.0, and trying to change the BLE advertising manufacturer's data with the information...
Hi,
I am sampling a moisture sensor using one of the analog pins without issues. However, since my circuit is battery powered, I need to account for voltage drop of a 3V...
I have an nrf9160 dk on the latest firmware (i.e. mfw_nrf9160_1.1.1) and I have been unable to establish stable connection to LTE network using iBasis SIM. I tried using the...
Hi,
I am trying to follow this tutorial ( https://devzone.nordicsemi.com/nordic/cellular-iot-guides/b/getting-started-cellular/posts/ncs-tutorial---temporary ) on Nordic...
Hi,
I am facing the same issue of case 244574 , we tried to fix it follow your advice but failed. Here is my code:
After the first reboot of modem FOTA, the application...
Hi,
Recently updated with " nRF Connect SDK V1.2", after that AT Commands is working only with nRF connect link monitor SW. Its not working with teraterm,putty. In tera...
Hi
I am using the SDK_16.0.0 and SDK_for_mesh_4.0.
Board: PCA10056, nRF52840.
1) I try to send strings to from the nRF to PC and then, using a python script, poll...
