Hi everyone,
I'm working on a project using the nRF54 and Zephyr RTOS . Previously, I implemented almost identical functionality on an nRF52, where the device consumed around...
Hi guys,
I got very strange problem:
I got 2 units:
1) "Tester" board (which is a CENTRAL)
2) "TOP" board (which is PHERIPHERAL)
The "Tester" get commands...
I am developing an ESL proof-of-concept based on the Nordic Bluetooth ESL reference architecture and transitioning toward a small-scale PoC production (≈100 tags) . I have...
Hello,
We are trying to assess signal quality while synced to a BIS and we would like to use the RSSI values. RSSI values do show up when scanning and at least in the...
Hi Nordic Team,
We are currently evaluating nRF54L15 for our product design and thermal verification process.
According to the public datasheet, we can find the operating...
I'm setting up a script we will use at production time to write some data to an external flash module connected via SPI to a nRF54H20.
I used the following as reference...
Hello.
I need some advice - I'm a beginner. I tested the transition to sleep mode via __WFI for the nrf52840 Dongle (VS code, SDK v3.3.0). I need some advice - I'm a beginner...
After 3 days of debugging and hours on the forums trying out various things, I just wanted to post a mini quick start guide to getting low power working. Turns out that all...
Hi Guys，
I want to implement a Vendor-defined USB HID device, But encountered the following problems:
1.When the PC sends data via USB HID , the slave(52840) cannot enter...
Since SDK15.3.0 the DFU example code has changed to require signed DFU commands.The DFU that we used is base very closely on the Nordic example. In our update process we have...
Hi,
I am facing an issue with the RSSI value when my device is in connected mode.
First, in ble_evt_handler(),
in the BLE_GAP_EVT_CONNECTED case, I place the following...
Hi I am using NCS version 1.5.0 and DK version 1.0.0
If I want to build any application using nrf9160dk_nrf9160 Im getting the following error.
Traceback (most recent...
Hello, We are about to release a Firmware update for our vibration sensors and we are now testing the consumption of the new firmware. Our sensor is a nRF51822 + Accelerometer...
I'm building a BLE Peripheral device using Arduino and Adafruit's nRF8001 BLE module. I can find and connect to the BLE Peripheral using any number of iOS BLE discovery apps...
I'm using Windows 10 64 bit version. I've Nordic SDK example usbd_ble_uart_pca10056_s140 loaded onto my Embedded Studio. I compiled the code and loaded into the DK. I have...
Hello,
I try to add the pc-ble driver from Nordic to my Qt application, but my application crashes all the time without a specific error. So I need some help with the implementation...
I am running a GATT server on nRF52 and I am saving the CCCD state after bonding but does Android/iOS as a client also save the state? I only looked at the Android API side...
Hi,
I have two questions:
1) I'm making a custom board for a hobby project! Are there any limitations to running a SPI driver with a voltage high of 1.8V? It seems that...
So I am using ESB and want a very percise timer. Because the 16mhz clock is not 2^n we want it to roll over at a certain value that is a multiple of 16mhz, so we chose 4.096E9...
Hi, I would like to add LED animation when DFU is in place. I know where to start it and where to stop it in the secure_bootloader source. The main issue for me is to add...
hello,
i am using nrf52840 with coded phy in our customised board and using the long range example as base for my application i have changed the ble_app_blinky to act as...
