I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
The nRF9160 datasheet tells the reader to refer to the website for Altium files. However, the only files I can find are for the development board. Is it possible to release...
What is the best way to change advertising data for each advertising packet in Mesh SDK's each of proxy / dfu / provisioner?
Using Mesh SDK 4.1, it would be ideal to be...
I have a working code which implements a UART peripheral written originally with SDK15.0
I would like to port it to the latest SDK 17.02
I can get advertisement and I...
Hello!
I have problem updating application firmware with the following message.
In nRF Connnect v.3.6.0 Programmer has been selected.
Log file indicated. INFO...
Hi,
We are trying to develop a wearable device that needs to sync time over a BLE connection and write the time to the internal RTC. We are using the nRF52832 for development...
Hi,
I'm experimenting a very high current during advertisement of the nRF52833. When using the "Online Power Profiler", it shows that I should expect peek current of around...
I'm attempting to use FDS on the nRF52840DK (PCA10056) with SDK V16.0 and SD enabled.
Per the documentation:
1) I register the callback function: fds_register(fds_evt_handler...
Hello, guys,
We are designing our custom board that contains nRF9160 SiP.
I would like to ask some questions here concerning programming/debugging nRF9160 SiP on the custom...
I am running my application on nRF SDK 16.0 and SoftDevice 7.2.0 but had this problem since 15.2 and 6.1.1 respectively. I thought it was resolved in an update since this...
Hello Everyone, I am using nRF52840 and i have 2 SPI slaves (Sensor and EEPROM), the sensor spi clock is use 10 MHz and the EEPROM is 40MHz, sck、mosi、miso、ss are all different...
Once I try to connect nrf52-dk development board to a personal computer, using a micro USB cable, once the USB is detected from the PC, it instantly reboot without any reason...
Hi Nordic team,
My OS is Windows 7 X64. My dongle is PCA1000 (nRF51822)
I used master control panel to connect with my target board and control it many years ago. But...
Hi all, I want to use the nRF52832 as the connectivity chip to give a separate application chip access to at least BLE and ANT capability. Ideally, the nRF would expose a...
I am trying to get the board advertiser name from the advertising data received by another scanner board. I am using softdevice S140 version 7.2.0.
The server board name...
