If it can work with iOS blue setting will be better
I need some reference to dev hid device in IOS
but I can just find my device ,connect ok but not work.
I need to create timeout below 1ms. I would pretty much like to use timer for that because I do not want to hold the cpu inside cycle. For me it is not important the exactness...
Hi,
While testing the device firmware update through the nRFtoolbox android application, i get "device has no required service" error more frequently.
I use latest version...
I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I want to know how to configure parity, stop_bits, data_bits, flow_ctrl parameters in UART in the xx.overlay file.
Although these parameters can be configured through the...
Hi
Nordic Team
I use ncs1.6.0, SES compiler.I have a very difficult problem:
Now I am debugging the 2.4g communication between NRF52833 and NRF24LE1. I set the rate...
In the Provisioner example (unmodified) given in nRF5_SDK_for_Mesh v4.2.0, they provide only 2 elements, even and odd. I've got 3 or more servers and I would like to control...
I have developed two codes based on app_ble_uart for central and peripheral and added peer manager to it for link encryption. The peripheral device advertise based on SIG...
Hello
I am using the PCA10040 board to capture packets for 3rd party BLE4.2 device
I can see on wireshark all advertizing packets
my question is , can I also capture...
We are using nRF9160 and have a rare issue with a very high current consumption from the battery. We are using lithium-thionyl chloride 3,6V batteries, three in parallel....
Hi Everyone! I'm developing a program for NRF52820 that reads the tx power & rssi and makes the calculation for testing different devices, and I've faced some problems while...
Hello Nordic Semi team,
I am building two BLE product. One acts a peripheral and has server capability. Other is central with client capability.
I am trying to understand...
Currently we are integrating the serial and BLE DFU into a single binary executable. The project enables the logging (NRF_LOG_ENABLED = 1) and we use RTT as backend.
When...
i am using VS code, nrf Connect SDK version 1.7.0, (2) nrf 5340 DK boards. Running the CLI example.
uart:~$ ot diag start
failed
error 13 invalid state
uart:~$ ot...
I'm just starting to make a project using SDK 17.1, which is loosely based on a working, mature project based on SDK 15.2 and I'm hitting a bunch of issues. My path here is...
I want to implement an interrupt using TIMER2, but it stops at Dummy_Handler instead of going to TIMER2_IRQHandler.
Is it due to the fact that I have not defined TIMER2_IRQHandler...
This is a pretty top level description of the problem. I've not dug very deep, but what I've observed is that when deployed against an AWS instance set up per the instructions...
Hi, 1-I have successfully developed an app ...\ nRF5SDK17009d13099\nRF5_SDK_17.0.0_9d13099\examples\ble_peripheral\ble_app_template. 2-I have set a UART example to send data...
