Hello All,
We are using nrf52840 board interface with wiznet550i.
We try to implement mqtt tls 1.2.we get following errors..
I get certificate verification error -0x2700...
Hi,
i am using SDK v8 with softdevice v8,using master control panel pc application,added custom service and characteristics to application,problem is characteristics value...
There is the board mark on the chip like n51822CEAAD01350A0, where DO is Build code, 1350 is tracking code(YYMM), A0 is lot code.
My question is how can I get those codes...
I'm trying to debug a randomly occuring Hardfault. In trying to trace down the source I read the CPU registers use the Nordic hardfault_implementation.c which grabs the register...
Dear nordic employee
my purpose is send a data the length is from 150 to 273
when my server device send data by sd_ble_gatts_hvx（the send length is fixed 10 bytes） ...
Dear nordic employee：
The service I want to find is the sound service of the thing52 thingy sound service
I tried to modify the HRT_central_client project to find the...
When the nRF5340 is in RXIDLE state and it receives a valid preamble but the Access Address does not match any of the configured logical addresses, does the RADIO automatically...
Env: SEGGER Embedded Studio success build many mesh sdk project; Nordic command line also install and run.
1. Install windows amd64 ncs sdk 1.7.1
2. Click "Open IDE" button...
hi support team,
i have two questions:
1.
Attached is the SLM communication log with new 9160 DK board
I am using NB card, and 9160 takes about 20 seconds to attach...
Dear All,
is it possible to configure the nRF9160 modem not to auto connect to a LTE network when at+cfun=1 is sent? I know that with at+cops a specific operator can be...
Hi all,
I'm implementing a lwm2m client on a NRF9160 and have a problem with read/write resource instances. I use Leshan demo server to test the object and a came across...
Hello,
I am working on a project where I need to update 100 clients at a relatively high update rate. The clients are spread out in a room of about 15 x 30 meters. I will...
Hello.
In our project we must have FOTA functionality, and we want to encrypt these updates
I'm trying to create an encrypted firmware image update for MCUBOOT with "blinky...
Hi I'm trying to create a release build but I have the problem that I can't seem to get zephyr to build without debug data included. I would really appriciate some help with...
Dear,
I would like to ask which would be the closest example to start on to perform a direct test mode for ANT+? Actually, exactly as it is made for BLE, but there is no...
Hi, I am Marcous. Currently, I am working on the direction-finding demos. To be specific, I am developing my own application with locators connecting with multiple beacons...
I'm sorry my English is not good enough.
We are currently looking into a BLE project that will act as a peripheral using Zephyr, which is included in the nrf Connect SDK...
We have built our application in nRF SDK for Thread and Zigbee. Since nRF SDK for Thread and Zigbee is in maintenance mode now, we plan to move our application to nRF Connect...
Dear NCS exprts,
I'm a little confused with the endian-ness between the firmware application and the controlling Android app. Lets first take a look at the firmware (running...
Hello Nordic Support Team,
I have a problem with establish encryption connection between nRF52 device and Windows 10.
My nRF52 Device supports pairing, but not bonding...
Hi,Master:
Question 1:
As shown in the below, why does the api read this variable with critical protection?
Question 2:
Suppose two tasks have write operations...
