I've a PCA10036 V1, I change the IC to nRF52822 QFAA-B016. With nRF5_SDK_11.0.0-2.alpha_bc3f6a0 and SD: s132_nrf52_2.0.0-7.alpha_softdevice, the programme started but if I...
Hi
We are developing software for the nRF51 with Keil under VirtualBox. Previously we used the PCA10000 dongle with the Master Emulator and MCP without issue. Now, with...
We are using nRF51822 for our products.
We want to know the min value of "Receiver sensitivity" when we use this chip for BLE.
The Datasheet says "Receiver sensitivity...
Dear
The BLE Multi-link example (ble_app_multilink_central and ble_app_multilink_peripheral)
shows how one central device can connect to multiple peripheral devices. ...
In the MCP app, if I have the following service data for an Eddystone beacon:
0x10, // Eddystone-URL type
0x00, // TX power in dBm. This is a signed integer so 0xEE ...
I have the nRF Control Panel Android application. It works fine with several BLE devices, but specifically for the Fitbit Flex, it fails to connect.
I know Fitbit wristbandes...
Hi,
The situation:
I was able to successfully receive known packets from a device running gzp_device_dynamic_pairing, from, the host running the gzp_host_dynamic_pairing...
Hi,
I currently need a 2.4Ghz OOK tx and I'm looking into the NRF52840 DK. I know it is not supported but I'm thinking of doing bitbang and control the PA to do an OOK...
Here are some question about SIG qualification:
Suppose I current use nRF52832 and S132 v7.0.1 ( QDID- 138862 ) and get SIG qualification without required test with Declaration...
I'm using nrf52832 with st25r3911b to let device read & write NFC card.
I modified nRF5SDK160098a08e2\examples\ble_central\ble_app_uart_c\pca10040\s132\ses to do this. ...
Hi, there,
I have a question about HFXO load capacitors and LFXO load capacitors.
Each load capacitors of nRF52840-DK are like below.
And i checked BOM file to find...
Hello! I'm somewhat new to SES and still trying to understand the program a bit. Some of the features are a bit less intuitive than others.
Right now, I'm actually not having...
Hi
From this article, It appears that up to 20 connections are possible when using S140 SDK 15.3.0 SDK on an nRF52840:
https://devzone.nordicsemi.com/f/nordic-q-a/33095...
Hi,
I am using nRF52840 with SDK 15.3.0 and S140.
I am connecting to multiple peripherals as a central device and using NUS to communicate with these peripherals. I need...
I'm trying to use the nRF5340-PDK SPIM at 16MHz, which requires me to use SPIM4 and dedicated SPIM4 pins
P0.08 - SCK for SPIM4
P0.09 - MOSI for SPIM4
P0.10 - MISO for...
Hello! I have implemented a OTA cluster basing on the example: https://infocenter.nordicsemi.com/topic/sdk_tz_v4.1.0/zigbee_example_ota_client.html
I use almost exactly...
Dear Amazing Community,
We are currently investigating any uA being consumed by our nrf52833.
We are using the PPK to track them and we believe that during normal operations...
I developed a custom RF mesh to USB serial bridge. Right after boot, I receive all serial messages, but once the host closes the serial port and open it again, nothing comes...
I use BSD socket to send and receive messages to a TCP server over LTE network.
When I send multiple messages by using send() (with flags = 0) function, I get an EINPROGRESS...
I am curious if anyone can point me to an example of working with the SRP functionality in the CryptoCell.
I see the headers for it at nrfxlib/crypto/nrf_cc310_mbedcrypto...
Hi,
I try to create an MQTT AGPS tracker.
I'm using a nrf9160dk with the 1.3.0v.
I use two threads, one for GPS (A-GPS) and one other to send value to MQTT (witch starts...
Hi,
I am using nRF52832 along with Softdevice 6.0.0, SDK 15.0.0, Chip Revision 2 (QFAA-EX0).
To set the transmit power for advertisement, I am using sd_ble_gap_tx_power_set...
