I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
Hello.
In our project we must have FOTA functionality, and we want to encrypt these updates
I'm trying to create an encrypted firmware image update for MCUBOOT with "blinky...
Hi I'm trying to create a release build but I have the problem that I can't seem to get zephyr to build without debug data included. I would really appriciate some help with...
Dear,
I would like to ask which would be the closest example to start on to perform a direct test mode for ANT+? Actually, exactly as it is made for BLE, but there is no...
Hi, I am Marcous. Currently, I am working on the direction-finding demos. To be specific, I am developing my own application with locators connecting with multiple beacons...
I'm sorry my English is not good enough.
We are currently looking into a BLE project that will act as a peripheral using Zephyr, which is included in the nrf Connect SDK...
We have built our application in nRF SDK for Thread and Zigbee. Since nRF SDK for Thread and Zigbee is in maintenance mode now, we plan to move our application to nRF Connect...
Dear NCS exprts,
I'm a little confused with the endian-ness between the firmware application and the controlling Android app. Lets first take a look at the firmware (running...
Hello Nordic Support Team,
I have a problem with establish encryption connection between nRF52 device and Windows 10.
My nRF52 Device supports pairing, but not bonding...
Hi,Master:
Question 1:
As shown in the below, why does the api read this variable with critical protection?
Question 2:
Suppose two tasks have write operations...
Hi, 1) I need to test the frequency accuracy as well as the spurious emissions. I have been trying with the Radio_test example but it needs some special UART configuration...
We have developed a project for the customer. In order to obtain longer battery life, we need to save power consumption, so we turn on CONFIG_DEVICE_POWER_MANAGEMENT. In order...
Hi teams,
Recently I have bricked my PCA10059 dongle by accidental writing PPK2 firmware to it.
I have read several recovery documents including https://devzone.nordicsemi...
What is the proper way of enabling / disabling flow control with the nRF Connect SDK? I've tried adding 'hw-flow-control;" as a flag to the uart0 define in my primary dts...
Hello to the community!
We are using extensively the PPK2 in our test automation.
I do not want to sound like a salesman, but I want to give our testimony: The PPK2 is...
Hello everyone,
I recently got a nRF52840 DK and have set up nRF Connect + Visual Studio Code (running on Linux/Ubuntu based system).
I went through the Getting Started...
