Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hii guys ,
I am using custom board bluetooth module based on nrf52 which is CBTMN10. I believe I am able to dump example code on my custom board bluetooth module using...
Hi
Is there a way to avoid entering a second time into bootloader mode, if the NRF_BL_DFU_ENTER_METHOD_BUTTON is still pressed after timeout?
I want to enter into the...
Hi,
I am developing a PC app to Buttonless OTA DFU a device(nrf52840) using BLE USB dongle(nrf52840).
1 . The device need a secure bootloader and the ble_app_buttonless_dfu...
Hi everyone,
I am working on the USB MSC example. I am able to create files and perform read and write operations.
Now what I want is to check if there is a FAT volume...
Hi ,
I'm use TWI scanner in nRF5 SDK v17.0.2 . I want to read the value of BM1383AGLV via TWI.
Now I could read the value in a infinite loop , but it is so fast . So I...
Hi Nordic tech support team,
I am currently testing DFU in my custom board (DWM1001) with secure bootloader and buttonless DFU. I was able to completely test the secure...
Hey,
I have configured 2 Thingy 52s , 2 nrf52840 Dongles and 1 nrf52840 Development Kit in a Mesh using Mesh Android Application
I want to create a Blinky type application...
Hi,
I am trying to do dfu in nrf52832..i made a zip file containing (app+bl and sd).the size of zip packet is 530 kb but the application space in nrf52 is only 328 kb..while...
Hi, I want to add PPP protocol to the Zephyr mqtt_azure example. I am using an nRF52840-DK with a Quectel BG-96 Modem. The generic Zephyr gsm_modem example using PPP is working...
Hi, I am using nrf52840 with S140 Soft device and SDK for Thread v4.1. In our test setup we got around 50 FTD devices in the same network. In some time interval we need to...
We are trying to connect the nrf9160 to a spi flash device. we have a custom board with the following pins connected:
sck: 27
mosi: 28
miso: 30
cs: 29
wp: 31
reset...
I would like to use the CC310's SRP accelerator with an application that uses S140. The uC in question is nRF52840.
I have added this code to the ble_app_blinky example...
Hi,
As per nRF52840 datasheet, the accuracy of internal temperature sensor is ±5°C. We want our device to be operational between 5 °C to 40 °C.
When we tested this extreme...
Hi,
I want to use the Zephyr network stack with its libraries on the nRF9160.
I tried to use the Zephyr tcp functions with the Zephyr network shell commands (eg. shell...
Hi Everyone,
We are using nRF52840 IC for our products which has 1 MB of flash.
Thread Secure DFU Example provided with Nordic SDK supports Dual Bank DFU. This limits...
