I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I've looked at how other projects handle sending large amounts of data and they all use a derivative of the TX/RX scheme that is used in the image transfer demo. The Peripheral...
I'm currently working an nRF52 using SDK 14.1 and Softdevice 5.0.0
We're having a problem where the microcontroller is crashing after a few days for seemingly no reason...
Hello,
I am using nordic sdk and working with C files.
But i would like to work on with C++ files as well.
How will i modify the makefile so that it can build both...
Hi,
Giving make flash command uses segger jlink in the interface MCU as programmer right. I tried to use nrfutil dfu serial -pkg package.zip -p COM_PORT for UART transport...
Hello,
I'm preparing production.
My development environments are :
- SDK : V12.3.0, IDE : miniJLink, Softdevice : s130_nrf51_2.0.1_softdevice.hex
- OS : Windows...
Hi Sir
I'd wnat to develop FW of Ublox NINA-B3 module by Mbed-OS, it includes nRF52840 chip.
Could I just enable the target "NRF52840_DK" and just modify the GPIO number...
Hi,
I have been using the nRF55 DK, through the external debug interface (P20), for programming my custom boards since I started working with the nRF52832 chip. So far,...
Hi,
I have a problem with nrf52dk SPI with the mbed compiler. In the mbed pin names file for nrf52dk the pins are p22,p23,p24,p25. I connect many spi sensors and not working...
Hi. Does anyone know where I can download the CDC ACM diver for windows 7?
I am running the example on the nRF52 dev kit, but I get an error as windows can't find the driver...
Hello all,
I'm new to nRF24L01 and trying to get the evaluation kit ( with Nordic's software) to work on windows 10. After reading previous threads, I used windows xp...
Dear Nordic engineer
There are two problems with the impedance matching of the nRF24L01 + .
1.How to test the local oscillator leakage in RX mode?
2.Is the test program...
I am developing a multi-link application where several Peripherals take turns transmitting real-time samples to a Central, generally about a 156 byte payload per transmission...
Hi,
As if we follow the steps given in the link for the update for combining Mesh SDK v2.0.1 and nRF5 SDK v15 posted by Hung Bui, I found out several problems related to...
Hi
I am trying to add the secure DFU bootloader (BLE) code to an existing application for the nRF52840. I'd like to send the logging information over UART. What are the...
Using a nRF51802, but can't find data about actual reset level other than min. VDD 1,8V ?? (Page 34 in datasheet )
I need to know actual reset level (VDD) for both rising...
