I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hello ,I wrote a program that allows to control the LIS2DE12 accelerometer but I am reviewing a fixed result which is always X = 72, Y = 33, Z = 32, I find out where the problem...
In my nRF52832 base-board, I don't have any leds and buttons.
I use Keil v5 and I used ble_app_uart_pca10040_s132.
I copied pca10040.h as custom_board.h and replaced BOARD_PCA10040...
I Cant clear the RTC2 after a Compare Match. First Compare is Triggered. After that no more Interrupt is generated. Code:
static const nrf_drv_rtc_t rtc = NRF_DRV_RTC_INSTANCE...
I debugged with pca10028, but J-Link can not recognize manufacturer.
If selected cortex-M0, it works but is very inconvenient.
How can I solve this problem?
Hello,
i am meeting problem to program the SoftDevice using an example project in Keil for nrf52832.
i have tested the development kit setup use Blinky Example . it is...
Hi,
We are using sdk12.3.0 sd130 v2 on nRF51822(32KRAM version). We want one central to connect to at least 3 peripherals. We are starting with ble_app_hrs example at the...
Configuration:
nRF5_SDK_13.0.0_04a0bfd
PCA10040
ARMGCC
Background:
I have created custom service based on ble_nus service. I have created 4 characteristics with notify...
I'm concerned about users writing too much or invalid NDEF data to the NFC function.
This could result in parse errors or buffer overflows leading to system crashes/malfunction...
Good Morning,
I need help for integrating a wifi card of this type or another that may suggest. With explanation of connection in the pinp Gpio of the thingy52 board, what...
Hello everyone,
I am looking to start developing something using nfc but I am unable to do so.
I am using SDK v12 and it has nfc examples as well like "record_url" or "adafruit...
Hi,
How to integrate both over-the-air and uart bootloader application for an device? We have a custom board with nrf51822 chipset, and we need to implement the firmware...
Hello,
I'm currently experimenting with the dual-bank bootloader in SDK 13.1. According to the documentation, if the new application can be activated, it is copied from...
Hello everyone,
I'm developing a new device using the nRF52832 but I have 2 questions before I send my PCB to manufacture, I hope you can help me out:
Is there any...
Hi,
Congratulations on releasing nRF Connect v2.0!
Unfortunately, I'm having trouble with adding apps behind corporate SSL proxy. Is there a workaround for this?
Please...
