Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hi everyone.
I used sdk v10.0.0 and softdevice s130. I want to make peripheral device with nRF51422.
This peripheral device have to configured with diffent peripheral...
I am still somewhat of a beginner to development with nRF51, but it seems to be that the SDK, specifically all the boilerplate code in the app_template example just to initialize...
Greetings from a Nordic newbie!
I am currently merging an existing AD 433MHz transceiver with a nRF51422 so that I can read an ANT+ heartrate monitor to our existing functionality...
Hi,
I am using Nordic nrf51 DK board with soft device s1xx-iot-prototype2_softdevice.hex and application program as CoAP server from nRF_IoT_Examples\0.8.0\coap\ipv6\server...
Hello,
When I learned the demo of 51822, I mentioned that device_manager is a core module to automatically save connection related info. But it's too huge to understand...
from this post link text i have again doubt
i define #define APP_ADV_TIMEOUT_IN_SECONDS 10. now my advertising stops after 10 sec.but i want to restart it again then??
I am trying to understand the difference between the timer driver and the app_timer library.
First of all: It seems like timer and app_timer are two entirely different things...
Hello,
I have a nRF51 DK (PCA10028) and I managed to programm an onboard nRF51422 SoC. Now, I'm trying to programm a nRF51822 on a costum board (WT51822-S2). I wanna try...
nrf51822 SDK 9.0
iphone 6plus System version IOS9.2
When the phone receives the QQ message "static void notif_print(ble_ancs_c_evt_notif_t * p_notif);" can execute.
but...
I am programming with mbed, and i am trying to start the adc-task via ppi and timer cc events.
another ppi channel is used to toogle the LED.
I am using the nRF51822 on...
Hello There,
I am looking to use many of the features found in the SDK Common Library such as the application timer. I am looking at the documentation and I am unsure how...
According to the S132 v2.0.0 release notes it states:
"minimum required memory - actual requirements are dependent upon the configuration
chosen at sd_ble_enable() time...
I need to implement the micros() function of arduino on nrf51822. Can someone guide me on how it can be done?
This the function for Arduino:
unsigned long micros() ...
We have two developers running the same version of IAR and the SDK and one of them has different device options under the project options. My IAR project works with NordicSemi...
Am using SDK 8, Single or dual bank serial bootloader brick during SoftDevice upate. Brick happens only if softdevice CRC validate fails(Stop Cmd). During CRC validate pass...
