When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
I am planning to migrate to SD 7.0 and SDK 6.0 in order to use the static pass key capabilities. When using the static pass key how should security params be initialized ...
Hello Nordic, I am currently trying to develop an application that would send data via satellite if there is no LTE coverage but I don't see any relevant documentation regarding...
I am currently using the ble_app_template code from examples\ble_peripheral in SDK v10. The code and BLE read/write function successfully works. I now want to combine the...
When I publish messages to the mesh network via a Vendor Model, after connecting to device and performing a successful vendor command sequence, I start sending publishes of...
Helo, I am developing a BLE product, and @ encryption stage, I get thie message on the topic.
I attach my log for further information.
The log entry that gives the...
Hi. I am currently using an nRF52840 DK board and SDK 17.0.2.
I require 16-bit heart rate service UUID to work with a 128-bit vendor specified custom service.
When I create...
I have competed development on a project using the digikey sparkfun dev modules. I'm now entering production but my factory can not find a model on the market that works....
I need to indicate a characteristic value that is longer than the MTU. Using the pc-ble-driver, no problem. Windows supports semaphores and I can call sd_ble_gatts_hvx(),...
I want to evaluate power consumption of nRF9160 used as AT command modem using Thingy:91 Serial LTE modem.
How to achieve lowest power consumption for Thingy:91 LTE Modem...
SDK 17.0.2
Murata MBN52832 module
I'm trying to bring up the ble_app_cli example on a custom board. I've tested this board with the ble_app_blinky example using a custom_board...
Hi all,
I'm having an issue using the nrf_gpio_pin_read() function from the nrf_gpio.h file. When I call it every time after calling nrf_gpio_pin_toggle() on the same pin...
Hi there,
I'm struggling to find straight forward peripheral interface documentation for an NCS project. I see there's something called nrfx ( https://github.com/NordicSemiconductor...
I have somewhat followed this guide for setting up Eclipse to program the nrf51822.
I get this error message when trying build the project in eclipse:
12:35:35 **** Incremental...
I am trying to use the nrfx_i2s library to run neopixels on a nRF52 DK. I am using SES to compile and flash the code. I am having trouble correctly using the library though...
Hi, is the workaround of modifying the boilerplate.cmake file (as shown here https://devzone.nordicsemi.com/f/nordic-q-a/49719/how-to-create-a-custom-board-file-for-the-nrf9160...
