Is there an AT command (For modem firmware >= 2.0.2) that can be used to validate whether the LTE modem can communicate with an external MIPI RFFE switch (for example on a...
Can Nordic share specific instructions on how to enable hardware tracing?
I've received the following patch from Tomasz, however I still see "trace clock missing" in Ozone...
Hi
our last product is based on nRF5340 and now we start a new design based on nRF54H20, and its essential for our design, i checked alot but there is no datasheet, reference...
just passed Cellular IoT Fundamentals while I was waiting for my nrf9151dk to be delivered... Now that I have the DK I can't get the dk to be provisioned...
I couldn't get...
NCS currently has a nice feature where the firmware versions are printed in the boot banner:
Is there a config option to also enable printing the nRF91 modem firmware...
Dear all,
after cutting the SB bridge to the QSPI chip and close the ones to get the pin free and disabled also qspi inside the nRF52840dk_nrf52840.overlay file I'm unable...
Hey, I have a problem understanding BLE behavior
I had a product was running in BLE phy 1M, and I wanted to convert it into PHY CODED.
It just sniffs all the advertisement...
Hello.
I'm trying to implement my own RF protocol, with the help of reference manual and examples provided here I was able to come up with this: http://pastebin.com/t2nhkj2B...
Now with the twi_hw_master.c with softdevice, I enable the twi on the start of twi_master_transfer and disable it at the end of twi_master_transfer, but I found the twi can...
Hi All,
I am in need to implement the Central BLE device which can receive the Data from an iOS peripheral device over a particular custom characteristic, Can anyone please...
I'm trying to implement my own radio protocol but the section about addressing in reference manual is very unclear to me. In the "Definition of logical addresses" table it...
Is it possible to protect part of the memory of nRF24le1, in such a way, that it can be used for a serial number?
For my application, it would be beneficial to be able...
Hello,
In the example "nRF51_SDK_8.1.0_b6ed55fvery\examples\ble_central\ble_app_multilink_central\pca10028" when opened in keil there is no flash_softdevice option shown...
dear everyone!
I order a kit- nRF52 preview DK:
www.nordicsemi.com/.../nRF52-Preview-DK
And i also download nRF52_SDK_0.9.1_3639cc9.zip:
developer.nordicsemi.com...
Hello,
I'm writing a driver for an I2C device (it's an external led driver).
My current code executes following steps ...
First I changed I2C configuration :
static...
Hello there.
I'm porting some code that previously worked on S110 stack v7 to stack v8 and I'am experiencing some issues.
After receiving a BLE_EVT_USER_MEM_REQUEST...
Accoding to the "how to generate the INIT file for the DFU",I have configuration Boot loader.hex,but i don't known how to configuration Soft Device.hex.The following is the...
Hello Nordic~
I want to control button debouncing on my nrf51822 based custom board. I went through the button_debounce example found in [Board/nrf6310/debounce_example...
Hi All,
I'm using ble_app_uart Application to send some notifications from Peripheral to central device. I'm using API ble_send_string() to send notifications to other...
