Hi,
I am currently testing the dect_shell example on two nRF9151 DKs and achieved a range of ~500m. I want to transition this setup into a multi-hop mesh network topology...
Hi: The device shows successful reconnection, but the mobile end is not connected.
And the connection information displayed on the device is (public), which is actually...
I am trying to measure the 300mA system current.
I cut off the system lane and connected Vin, Vout.
And when in ampere mode, the system is not turning ON.
(When I replaced...
Hi Nordic,
I have a custom board using a Raytac MDBT53 module with nRF5340. The board is designed for 3.3 V / LDO mode, but during bring-up I likely flashed firmware/configuration...
Hello Nordic support,
I am using two nRF54L15 devices with NCS v3.0.1 and ESB DPL at 1 Mbps. Auto ACK is enabled, the payload is 252 bytes, and the retransmit count is 9...
# SoftDevice Controller assert during DTM receiver test at dead/marginal RF link (nRF52833) ## Summary On an nRF52833, running the nRF Connect SDK Direct Test Mode (DTM) 2...
A customer implemented a nRF52840 (QIAA package) and says the output power is about 10dB lower than expected. Having done multiple nRF52 designs with good results, I reviewed...
How does scanstart serial command work in the Mesh SDK?
According to the documentation, it appears that the command lists out unprovisioned beacons. I get a success response...
Hello,
1.We have to implement multi pal peripherals and one central.I have to send data(some sensor data) between it periodically....using NUS sample it is possible??
...
Hello,
I'm trying to repair a device (made with nrf51822) that is not entering the Pairing mode anymore. Everything seems to work fine except that it is not discovered by...
Hi
I am looking for an example that uses encryption on some services/characteristics. But without using bonding/MITM.
I remember it was possible with SD S110 to use...
I am in the process of porting my ANT + BLE app from SDK13.0 to sdk14.0
My basic set up process is
nrf_drv_clock_init();
nrf_drv_clock_hfclk_request(NULL);
while ...
Module for generating a pulse-width modulated output signal.
This module provides a PWM implementation using timers, GPIOTE, and PPI.
Each PWM instance utilizes 1 timer...
hi,
i am working on NRF52 with SDK v11, softdevice S132. i have implemented my application with DFU as per the HRM example in SDK v11. now i want to know about what is secure...
after Installed nrfgo studio ,i turned on the sorftware,but the log display" JLinkARM.dll is not correctly installed. Please run the nRF Tools installer to install the newest...
I can not find the datasheet for Preview Development Kit, the only avialble documentaion is the User Guide and nRF52840 Objective Product Specification. What i need is the...
Hi,
We are integrating a 3rd party device with our application and while we were parsing advertising data, we found the same data received in Android at 3rd and 4th index...
pm_peer_data_remote_db_store() stores an array of ble_gatt_db_srv_t.
pm_peer_data_remote_db_store() calls pm_peer_data_store(), which requires a buffer whose alignment...
Hi, I downloaded the latest SDK V12, coped the example HEX from the BLE Beacon and it worked fine. I tried to then compile using Keil, it compiled,
when upload again blinky...
Hi all,
I am using PCA10040 (nRF52832) and I want to create a ble mesh network. I know that this SDK contains some examples for mesh, but I am not able to find something...
Hi!
I have an implementation running with a peripheral sending notifications to a central at 27.5 ms. They are both configured with HIGH BW. Sending of notifications is...
