I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
I am tried porting the USBD to mesh serial example according to usbd_ble_uart this days, and some functionality are test fine including Tx and Rx between Provisioner(USBD...
I teach high school robotics and after the BLE blinky program which works greata with mobile nrf-connect, I wonder what people think is the best, generic BLE
Central and...
Hello,
Can you please provide the input impedance or the S-parameter file of the impedance for the nrf52840 for receive mode, and also at tx power levels of -40dBm, 0dBm...
AD value and voltage conversion between the calculation formula
adc_config.resolution = NRF_ADC_CONFIG_RES_10BIT;
adc_config.scaling = NRF_ADC_CONFIG_SCALING_INPUT_ONE_THIRD;...
Hi, I have a few questions about the nRF52833 DK.
1. Can I fix an antenna array onto the DK to make it a receiver in Bluetooth 5.1 AoA applications? I can see that there...
My LTE Sensor Gateway sample connects via Bluetooth LE to a Thingy:52 and collects the flip state of the Thingy successfully. Now I want to replace the Thingy with the nrf52840...
OS: Windows 10
NRF Repository at branch master, commit bd67811aa123a49cb36991be886f3fafb4730449. Zephyr version: 2.1.0 SES version: 4.20a
Have tried running SES on administrator...
Hello,
I try to run electron app with pc-ble-driver-js and I have this error:
Error: The module '\\?\C:\app\build\Release\pc-ble-driver-js-sd_api_v2.node' was compiled...
Dear Team,
I am migrating the ANCS client application from SDK-12.3 to SDK-15.3 version.
Please find my below observations in SDK-15.3.
Erase the flash completely and...
Hi All,
I'm developing my product based on nrf51822.
I was using keil IDE for that.but i wanted to develop it in Segger instead keil ide.
is segger is supporting for...
Hello, I am working on an IoT project. For this project , I need to send some data using BLE. I developed a firmware for this application based on the sample ncs/zephyr/samples...
HI ,
In our project we are using multiple gpiote and app timer interrupt.
SDK we are using is 15.3
DOUBTS
If both gpiote and app timer interrupt trigger simultaneously...
Hi,
I'm using nRF mesh library v1.2.1 and integrating into my mobile application which I am developing, I implemented provision functionality without errors but sometimes...
