When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
I am planning to migrate to SD 7.0 and SDK 6.0 in order to use the static pass key capabilities. When using the static pass key how should security params be initialized ...
Hi,
can we do the mathematical operations (like math.sqrt ) using nRF51822 ? Since, our project requires many simple mathematical operations, we need to decide whether...
Hi,
During the initialization of the SIM I have this message:
There was an error submitting your user information. This SIM cannot be activated. I am from Israel. What...
Hi All,
I have the strange issue with scanning. I have the project losely based on examples where I created peripheral adevrtising with 1s interval. This sends the custom...
Hi there, I'm using nrfutil ( nrfutil version 6.0.1 ) to dfu via ble (dongle),
Mac (10.15.2), windows (10), linux (raspbian) have been tried out to update the firmware none...
I am using the '840 to construct a small network using the ESB stack. In this design, a master (dongle) transmits to each slave and receives an ACK w/payload response. The...
I changed the way to get the upgrade program in the bootloader program and wrote a function to write the accepted bin file to the bank0 area. However, I found that it took...
Hi,
I am using BMD300 rigado board having nrf52. In my application i am tracking the ADXL362 accelerometer's motion.For this, I am combining SPI, UART(for displaying data...
Good evening,
after a very long research I couldn't find any answer.
Is (and if, how) it possible to connect an Arduino (or ESP32) via SPI, I2C etc. with the nrf52840...
Hi,Nordic Team
I tried to set 0,1,2 modes respectively in GNSS option, and the test current is as the attachment .
0 1 2
/**@defgroup nrf_gnss_psm_modes Values indicating...
Hi,
I am using nRF52832 with s112 BLE stack and SDK v16.0. I am wondering what is the most proper way for the "idle_state_handle()" method in the main loop.
Currently...
Hello,
I need to have connection status at the application level (IOS).
I'm working with the example "light switch server proxy" where the heartbeat profile is working...
Hello, I modified the instance in usbd_hid_generic to simulate it as keyboard. I checked the code of NRF52840 on github about the keyboard. It USES the function app_usbd_hid_generic_in_report_set...
Hello,
I really like your products since nRF51 but I noticed the same experience issues every time.
I tried your nRF9160 DK with the new SDK and I’m very disappointed...
