Hi all,
I'm deploying an nRF9160-based device in India and hitting the familiar "which SIM actually works here" wall. Looking for current (2026) experiences, since older...
Hi all,
I've built a custom nRF9151 board, which is successfully responding to the basic factory AT commands. It won't accept a CFUN=1 command though, presumably because...
Hello!
I think there is a problem in NCS v3.3.0. nRF54L target, sysbuild build with MCUboot and TF-M, partition layout coming from devicetree (SB_CONFIG_PARTITION_MANAGER...
Hi, I'm developing a keyboard-pcb with NRF52840. I'm doing this as a hobby and are not that experienced with integrated circuits. Anyway, I designed and produced a pcb, but...
Hello,
in cases where the LTE signal strength is extremely low, we observed that the LwM2M /4/0/2 RSRP rolls over from -128 to 127. We found that the nRF Connect SDK uses...
As part of the Bluetooth LE course we need to setup and install the nRF BLE sniffer for wireshark. I have followed the explained steps in the course to set up wireshark to...
The at command documentation says that ENVEVAL is only available in system mode 2 (CFUN=2). Is there a reason why the command can't be run in any other mode? For example if...
I'm testing the Serial LTE Modem application on the nRF9160DK with the LTE Link Monitor. I want to use the DK as a UDP client to send data
to my remote server via UDP over...
Hi,
I am working with a custom board that has an nRF9160 SiP (B0). I am using SDK v1.6.0 on a Windows 10 machine. Modem FW is v1.2.3.
Our device uses GPS periodically...
Hello all,
I'm trying to use P0.05 (AIN3) as output, but it does not work.
in file .dts is used as: rts-pin = <5>; status = "okay"; of uart0, I have to change this config...
I'm evaluating feasibility and developing a Proof-of-Concept for a client using the NRF9160 + NRF52840. This is a second generation product where the client wants to evaluate...
Hello,
I'm currently using SDK 17.0.2 with NRF52840. We have our SPIM3 device up and running nicely. I'm now de-risking our SPIM0 device and noticed that chip select isn...
hi,
i am adding dfu feature to ble_uart code.
i did all steps as explained in https://devzone.nordicsemi.com/f/nordic-q-a/48872/how-to-merge-one-application-with-dfu-feature...
Hi Nordic, you should add a BIG warning label, as show below, under the UICR description for all nRF52 devices, saying UICR registers cannot be erased when APPROTECT is enabled...
Hi Team
For some reason, I need to disable CONFIG_BT_TINYCRYPT_ECC. But I don't know if our BLE controller in NCS rely on Tinycrypt lib when it need support the ECDH paring...
Is not something like
missing in https://github.com/nrfconnect/sdk-nrf/blob/master/applications/serial_lte_modem/src/main.c#L227 ?
Error return code should be handled...
Hey all,
I'm currently working on a ble_app_blinking in which I added a temperature service. I can connect my phone to the bluetooth of the board in nRF Connect application...
1) Why nrf_delay_ms(500) is required in twi_sensor example, in main.c, while(true) loop?
2) Is the __WFE(); interrupted by NRF_DRV_TWI_XFER_RX inside twi_handler?
3) From...
hello,
i am using nrf52832 customised board with sdk 15.2 and using ble app blinky example my need is to scan and advertise the nearby beacons in one advertising packet...
Hello everyone,
I'm using a modified version of SDK 15.0.0 ble_app_hids_keyboard on my nRF52 DK. It sends a volume up and a volume down command when I press buttons 1 or...
Related to https://devzone.nordicsemi.com/f/nordic-q-a/76545/lpuart-nrf9160---nrf52840 (I can not add reply there).
With ncs v1.6.0 every second AT transaction fails.
...
