My sensor is off-standard,so I have to use gpio to read and write my sensor.
Gpio IIC will take about 0.5ms to get data.
My app need send data every 7.5ms,it seems that...
Hi,
My android Proximity application fails on service discovery only for the very first time it connects with the devices(nrf51822 evaluation kit with sdk 5.2.0). Actually...
Has anyone converted the app note AN34 DTM Python script to C# or C/C++ ?
The Python DTM script is works OK with the setup specified in the app note AN34 figure 2, which...
Hi,
I have a serious problem, when I use uart of NRF51822 QFAAC0 to receive data from another MCU, I found that it will lost one bit at same position everytime. my SDK is...
Hi,
I just started to interface the lcd display with nrf51822 evaluation board. The display i'm using is, spi compatible, 18" tft (160x130) from tiny lcd. I took spi master...
Hi,
We are using the nRF905 device in an application where it needs to switch between auto-retransmitting and sending single packets, due to it communicating with several...
Previously, I successfully completed and performed OTA flashing, and I haven't made any changes to the DFU-related programs since then. However, recently, I have been unable...
Hi! We have tags based on nrf52840 and nrf52833 in the field, running against a central with a nrf840X dongle.
Recently we have had an inexplicable peak in 'Failed to Encrypt...
I want NRFX_SPIM_EXTENDED_ENABLED to be 0. but for some reason it is set to 1. from my current understanding I conclude that the if case here check weather each node with...
Hi
I used the nrf-esl-bluetooth-2.6-branch example to flash the 5340DK (AP) and 52840DK (Tag). I sent the command esl_c pawr update_pawr 9 0 , and then sent the command...
Im trying to clear NVS, it gets cleared but then causes device to reboot.
code in question is :
output halts after Erasing NVS flash memory (0x000f8000, size: 24576...
Hello,
we are developing our first predict with the Nrf52840 running with VDD at 1.8V(default option).
so far we have always programmed and debugged NRF52 devices using...
Hi,
Does the HCI UART sample include DTM capabilities? https://docs.nordicsemi.com/bundle/ncs-latest/page/zephyr/samples/bluetooth/hci_uart/README.html
When issuing the...
Hi,
I'm looking to implement the smp protocol in my central device based on nrf5 sdk, in order to update my new peripheral device based on ncs v2.6.1.
My questions are...
Hi, I am trying to test openthread functionalities on the nRF54L15dk and cannot build the "Thread: CLI" sample on NCS. I am setting my board target like so: and keeping all...
HI
When creating a simple blinky application from template in zephyr and trying to build a configuration i get following errors.
How can i add permission to script kconfig...
I am using the central_esl example from the nrf-esl-bluetooth-2.6-branch to flash onto the 5340DK, and the peripheral_esl example is flashed onto our company's (Shenzhen Abluetech...
Hello, we have a following issue: we would like to use nRF5340 QSPI driver with external RAM to store measurements data. Power supply for PCB is 1,8V, so we tried to use APS6404L...
Can Channel Sounding technology and BLE Mesh be used at the same time? Does the SDK support it? If they can be used at the same time, will it affect the communication of mesh...
I work NCS2.8.0.
In NCS2.6.0, there was no problem if I put the BOARD settings in CMakeLists.txt and ran "west build".
However, in NCS2.8.0, an error occurs. (undefined...
Hello,
I am looking for information to be able to process CI/CD automatic tests for an nRF5340 project.
I mean compilation of the project, and simple tests by using GitLab...
