This is not a real question for support. It's more a success story i'd like to share with you!
Our company develops firmware for various customers on a lot of different...
Hi all,
What is the maximum data rate for the nRF24AP2 when using the Synchronous serial interface?
I cann't see it in the datasheet.
Is there anyone can answer me...
Hi,
In my design, there is a tag used by 24l01,It can transmit the temperature value.In the tag, the parameters are like this:
addrofch[0] = 0xe7;
addrofch[1] =...
We've been working on a product that utilizes a NRF51822 chip as well as WS2812B NeoPixels. Since there have been numerous posts about it here we've decided to release our...
Due to limited resources we are looking for someone who can help us with making a custom profile.
You are preferably in the Stockholm area and have done this before.
The...
Just putting this here in case anyone else comes across this issue, esb_arm.lib and gzll_arm.lib don't appear to implement the work-around in PAN 18(in the version I tested...
Hi,
Im currently adjusting this i2s sample code to work with my TAS2781 audio amplifier. The code works perfectly but I just want to do a little adjustment on the channel...
For several months now, we've been hearing that developers can start developing DECT-NR+ applications. The following sources are a few examples: - https://www.dect.org/userfiles...
Hardware is nrf5340DKI
nrfconnect v2.6.0
zcbor library 0.8.1.
I'm running a project on the nrf5340 DK that is using the zcbor library to encode log events. The cddl...
I am saving data to the internal memory of the nrf52832 processor. When the data size increases, the processor starts to slow down. Does anyone have a solution for this?
I'm using spi_transceive_dt() to write a register read command then immediately read back 16 bits. However, despite having a receive buffer of 16, only 8 read bits are transmitted...
I used FOTA download library to download a new image from http server , then update the image by swapping the 2 images Now , the old image is in the external flash and the...
Hi,
My customer is working on their PTCRB certification. They need to complete USIM testing and they could not find information on device voltage support per ETSI 102 230...
We're developing an LwM2M application based on the lwm2m client sample with the goal of sending data to ThingsBoard as our main telemetry platform.
The Application in based...
Greetings, Our system consists of three BLE sensors using an nRF52840 to send data back to a central tablet or PC. We are receiving reports that the sensors take a long time...
I've been searching threads on this topic on DevZone and I found a couple that concluded that MCUBoot can work with external SPI flashes, but not with an SD card.
Is that...
I am using PHYTEC link board eth ( https://docs.zephyrproject.org/latest/boards/shields/link_board_eth/doc/index.html ) as ethernet shield using SPI on nRF9161.
I updated...
Hello, per the PPK2 user guide, I see that the switching during auto-ranging can cause measured current to be higher than the actual current due to inductance.
To be clear...
Our products use NRF52832 chips in production, and now the finished product needs to do an SRRC certification, but I need to confirm whether the original factory of this chip...
Hey, I need to set characteristic length for a PTS test to MTU-1 Otherwise the test case GATT/SR/GAC/BV-01-C will failed with the message - Failed: Cannot find characteristic...
hello:
My project is based on "esb_rx",NCS2.5.1，nRF52832.I need a Unique address for my product ,so I add flash read/write function for my projict, base on "soc_flash_nrf...
