Using one ADC, the current can be reduced to about 40uA after the ADC value is taken. Using a two-channel ADC, after the ADC value is taken, the current stops at about 0.4...
I'm searching for a software engineer who can help us getting OTA support between nRF52810 and PIC16 MCU.
nRF52810 must have command- and data mode over UART, Pic controler...
I want to be able to read the gyro and accelerometer values from the MPU6050 sensor.
As a base start I downloaded the NRF5 SDK V15.3.0 and modified twi_sensor_pca10056 program...
Hi. I'm using nRF52832, SDK13.0.0.
I should use SHA256 and MD5.
I made my code as below.
NRF_CRYPTO_HASH_CREATE(init_packet_hash, SHA256); NRF_CRYPTO_HASH_CREATE(init_packet_md5...
Hi. I'm using nRF52832, SDK13.0.0.
I want to use SHA256 as below.
output32Byte = SHA256[input32Byte];
Which function or example can I refer to?
And also I want to...
I tried to port the example "ble_app_ipsp_initiator" to pc-ble-driver and run on Linux. The peer device is another PCA10056 device running ble_app_ipsp_acceptor. The problem...
hi...
i want to use two uarts in nRF52840 , one uart to one pc and another uart to another pc .Data should be transferred and received between the nRF52840 and pc how can...
Hi,
In the cops=0 state, how long does the modem take to scan each band of both cat-m1 and NB-IoT? How does a roaming sim affect these times for both technologies? In...
Hi
I would like to give a try to nrf52 on mbed. So I went to:
https://os.mbed.com/teams/mbed-os-examples/code/mbed-os-example-blinky/
and clicked Import to compiler...
The demo board would not connect (no second LED)
Since in Italy we only have NB-IoT, I guess I should recompile a more recent version of the demo application.
I have followed...
I'm a newby in bluethoth communication. To control model cars and model trains in scale 1:87 I built a decoder with an ATMEL chip. The communication based on digital infrared...
We are moving to the stage of testing our custom PCB which has a nRF9160, from using the nRF9160 DK
We need to do initial tests on our antenna, tuning network, and layout...
Hello,
I just started working with a couple of other people on firmware for a BT dongle.
The existing codebase/software build is based on Linux environment using command...
Currently with default thread network we are using channel number 16 ,Now if we want to change the channel to 25 ,I am using thread API otLinkSetChannel and to get channel...
Hi Everyone ,
I have setup an gpiote iinterrupt on a button on a custom PCB incorporating nrf52840. Whenever the interrupt arrives(button pressed) the bluetooth shall wake...
IDE : Segger Embedded Studio for ARM V4.12 , nRFgo studio
SDK : nRF5_SDK_15.2.0_9412b96 + SDK for Mesh3.1.0,
Softdevice : 6.1.1
Computer Platform : Windows 8 64 Bit...
Hi, I have been using MQTT_simple example and building my application on that. One thing I noticed is that power consumption is around 40mA. I would like to hit that 7uA or...
Hi,
I am using nrf52832_xxaa with SDK v11.0.I have the requirement to disable the debug at the start of the program.(Also to enable it if required in the future).
I use...
Hi All,
I would like to interface a sensor with nRF52840 DK via I2C. I am looked schematic of nRF52840 but I can't find anything about I2C pin.If anyone know the I2C pin...
