Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello, I'using nRF Connect SDK 1.9.1 on linux mint PC. nrfjprog version : 10.15.3 external Jlink version :JLink_V758b nRF chip : nRF5340 I'm able to flash, debug the nRF5340...
Hello there,
I have read other issues regarding working with a larger MTU size, but I still have not been able to get it to work correctly. I realize that the peripheral...
I run the Asstet_tracker V2. The part of LTE log is as below:
..... 2022-05-19T07:58:34.234Z DEBUG modem << [00:00:33.314,788] [0m<dbg> azure_iot_hub_integration: azure_iot_hub_event_handler...
Hello, guys.
We are using nRF51822 SoC in our project. I would really appreciate your help with the expected current consumption in BLE advertising mode. Here is what we...
Hello,
I am trying to use Direct Test Mode example on SDK v17.0.1 to do our product's pre-production RF tests. I can see expected results on nRF Connect Direct Test Mode...
Hello every body.
I have created my own objects and when I was testing some configuration I realized about the following:
1. When I declare the objects outside the main...
I adding custom code to asset_tracker_v2. Two UARTs are required in my project. The firmware to be added to nRF9160 is already running very well in NRF5340 based UART communication...
As the title suggests, I am unable to set P0.01 as a gpio output. I know this pin is also used to source an external LFCLK, however I am using the internal RC clock.
I have...
Hello,
I see that there is an option for the HFXO external oscillator, but I do not see any place that lists which pins to connect a crystal to. Is this HFXO (and the LFXO...
Hello, We are interested in developing mechanism that will allow the server to send push notifications to our nRF9160 device. We need to be able to respond to the notification...
At the start of my application, I write several hundred of records, each of size 8 words. Each file_id/record_key is unique (one record combination per file_id/record_key...
I'm struggling when using PWM and DMA to generate a sine wave. I'm sure I'm not interpreting the documentation right, and I hope someone can point me in the right direction...
