Hi,
I've been using the nRF51 dev kit, and today it stopped mounting when I plug it in. It doesn't show up as MBED or BOOTLOADER.
I use both Mac OS X and Windows, though...
SDK_9.0.0
I was trying to implement 2 different UART connection parameters so I decide to use re-initialization.
My initial parameters included APP_UART_FLOW_CONTROL_LOW_POWER...
I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Hi.
I have received my first nRF52 device that has the new and improved APPROTECT mechanism, and I'm having a hard time disabling the protection for debugging.
I have...
Hi, we are working on an application which sends advertising data from multiple end-nodes simultaneously. At the scanner end, we want the link layer to generate a common advertising...
I'm having an error in my project where the app_error_fault_handler(...) is triggered generating an NRF_FAULT_ID_SD_ASSERT. I've overwritten the function and stored the ID...
I want to add a random delay in range 2000 to 3000 ms before my device perfrom any activity.
pls tell how can do this at earliest
usins some timer or something else
Dear Concern,
We are using nrf52840 USB dongle as one of the components in of our products. There is a chance that the device can be put inside a metal container. Right...
. I am using ble_app_beacon as a base code in that i had enabled extended advertising but i can only be able to send 198 bytes of data, if i try to send more than that led...
Hi,
The ZB_ZCL_VERSION define in the file zboss_api_zcl.h have a bad value in the SDK NRF 5 v4.1.0 In the documentation, it is mentioned that :
The Nordic Zigbee software...
Hi!
I did a mesh trying to use diferent versions of a project renaming them, deleting the files inside the folder where I have my projects, putting inside other projects...
We're using nrf Device Manager for mobile to perform DFU over BLE to an nrf5340-based module with firmware built using the nrf connect 1.6.1 SDK and the out-of-the-box Zephyr...
Why there are multiple resets after post validation, firmware activation, etc in firmware update process? Can it not be handled sequentially without resets?
Hi,
We are trying ble_app_uart example for nRF51822 with nRF5 SDK v12.3 and ble_app_uart_pca10028_s130.hex file provided from hex folder works fine, but when we open IAR...
Central nRF5 device connects to peripheral NCS and initiates bonding.
The peripheral reports that security failed with error code 4 (BT_SECURITY_ERR_AUTH_REQUIREMENT) "The...
Hi all,
I am a beginner of nRF5340, trying to test AoA function for indoor positioning.
I'm wondering if there is any helpful document that goes through the whole process...
