I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hello,
I'm currently starting to develop with the Nordic nRF5340dk and trying to build a mesh network but i'm having some trouble on the examples to understand and buld...
Hello guys,
I have some doubts in the examples you provided for BLE for mesh.
My questions are:
1. - In the examples of light_switch (server or client mode), the nodes...
My goal was to make a bootloader, that, when not requested, still goes do DFU mode for 5 seconds,
so that there is always an option to get to the bootloader after boot,...
I would like to do log timestamping using the UART backend with NRF_LOG.
As described in many devzone posts (e.g. here: https://devzone.nordicsemi.com/f/nordic-q-a/18707...
Hello!
I have a short question, maybe someone can help me.
I set custom advertising data in the following field on the advertising side:
Now I want to read this data...
Hi all,
I am developing a BLE device prototype. There will be multiple such devices. How can I write the UUIDs to flash while flashing the hex file. Or how can I get the...
When I call this function on any of the Development Kits, my application restarts just like when I power up the DK for the first time (after being programmed of course) or...
Hi!
I'm trying to make the NFC feature on a custom board while having BLE (soft device). When I run the nfc record_text exemple project on my custom board, everything works...
We plan to design a module that wirelessly connects via the nRF52833 chip with RF amplification, 2 PWM outputs and multiple
Digital I/O interfaces，One ADC interface and...
I have developed the application code for light node in ble mesh network.
I was able to see this error quite often:
app_error_weak.c, 115, Mesh error 4 at 0x00000000 ...
Does the 9160 GPS module have a built-in LNA? Is it possible to adjust the GPS receiving sensitivity?
We hope that the wireless index of wearable products when worn on the...
The set up which are used are a nRF52840 dongle programmed through nRF52832DK's debugger. After executing "erase all" in Programmer app, which erased the bootloader, it's...
