Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
We managed to tune PCB antenna as per your instructions. I was wondering if we can use general purpose caps as shunt capacitors or should we use some kind of high frequency...
Hallo Support Team
I have filled out the form in Appendix E.2 in EN 300 328. I have declared the device as "non-adaptive" mentioned in c) as already answered in another...
Dear all,
I am working on an nRF52840 project that communicates with an external NAND Flash memory and I am looking for a suitable file system for my external flash memory...
Hi,
I am using nRF9160DK and I want to use AGPS. As my understanding AGPS requires a network coverage. In India there is no coverage for LTE-M or NB-IoT.Any other solution...
I'm working with an nRF5340-PDK board and have SPIS (SPI slave) working at a basic level.
I'm using CONFIG_SPI_ASYNC=y, but I'm wondering what will change if I use CONFIG_SPI_ASYNC...
Hi
We are using nrf51822 with SDK 10 and softdevice s110. We completed the software and in general everything works fine. In the final step, we decided to add the peripheral...
Does the nRF52840 work with 20V USB Power Delivery? My system runs on 3.3V and there is no other need for 5V on the board. Do I need to include separate DC-DC conversion for...
Hi all,
Currently employing my custom board definition for Arduino Nano 33 BLE for use with the nRF5 SDK. So far I have gotten an array of examples working including the...
Are there any examples for the nRF5340-PDK showing how to use the audio clock (ACLK) with the PDM or I2S peripherals?
What changes are needed to prj.conf or nrf5340_dk_nrf5340_cpuapp...
Hello Team,
We are working on PCB design using the nRF51822 QFAA and we have some questions regarding the antenna circuits and antenna PCB design .
we are referring the...
Hello guys,
We use nRF9160 and nRF Connect SDK v1.3.0. In our application, we need to keep track of time and timestamp some events. We can connect to the Cloud and get a...
Hi,
Trying to convert an IAR project to Segger Embedded Studio. Started off from ble_peripheral_blinky SES project file and added my stuff from the IAR project. When compiling...
I have tried compiling peripheral_hr in Zephyr, as well as flashing the heart rate demo binaries.
All give the same result - the board simply resets as soon as BLE Advertising...
Hello,
I'm trying to connect as fast as possible two devices (central : 52832 S132v5 and peripheral : 51422 S130v2), for a given advertisement interval. The central will...
