Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello,
I have an iOS application communicating with a custom device having a nordic 8001 chip.
They have established a bonded relation. In nRFgo Studio, in Security...
Hi there, thanks for your help in advance!
I have tried the nrf51-ble-ancs-nus sample from github and making it work on a 51822 EK board, i.e., it can receive notifications...
We're evaluating options regarding pre-certified modules. Usually modules are certified using a specific SoftDevice. The module we liked to use is FCC (and more) certified...
Hi Nordic team,
I’m testing neighbor cell measurements with 9160DK and see completely different results with 2 SIM cards:
Google Fi SIM (T-mobile): 1 neighbor in most...
Hi, We are using NCS v2.0.2 on nRF52840. I have a question: what is the best practice to re-configure uart/gpio at runtime? What we need: 1, Configure 2 IOs as UART TX/RX...
Is there a way of visually verifying if you're programming an external board with the nRF52840DK? Sometimes I'm not sure if the pins are wired up correctly, in which case...
Toolchain Manager reports "VS code not detected..." when I try to "Open VS Code".
This problem started after I upgraded Toolchain Manager to v1.1.3.
The log file follows...
The 15nH inductor specified in your example designs Taiyo Yuden's HK100515NJ-T is not available. A recommend replacement is Johanson L-07C15NJV6T (Digi-Key). Is this part...
Dear Community, Where can I find/download the very cool VScode color theme ? I mean the one that is visible on Nordic's screenshots on the website: https://nrfconnect.github...
Hi,
I am trying to create 2 elements with the same vendor model implemented.
My vendor model enables to switch on a pwm_led at a particular power during a given time....
hello
I had developed code based on the example ble_beacon_app and tested on nRF52840DK. That worked fine. I need to make the same work on the nRF52840 dongle. I followed...
Hello,
I'm using a Nordic Thingy:91 device for testing the asset tracker v2 application. I have a Verizon SIM card that's activated and is successfully registering with...
Hello,
This past week we received a software update that minimized the pristine build and erase and flash buttons to a small, barely noticeable icon out to the side of the...
I have an nRF52840 design using the chipscale package. I have very little I/O so it can all be placed on the outer ring to avoid the blind vias needed for the inner ring....
I am working on a BLE to ANT (Specifically FTMP to FE-C) gateway.
HW used is the pca10059 dongle.
Windows10, Programmer 3.0.4, Segger 5.42a.
SW is nRF5_SDK_17.1.0_ddde560...
