I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
Hello,
I'm using the Infineon Optiga Trust X chip for ECDSA signature verification but I'm having trouble saving the public key.
Currently the public key is generated...
C++ exceptions can sometimes fail causing a std::terminate on every throw. This turns out to be a linker issue present in the following files:
nRF5_SDK_17.0.2/components...
Hello
I tried to set the eDRX mode to more then 1 min. in many different project and samples, but after 1 minute it always turns on the modem. Does anyone have a clue what...
Hi everyone, I’m using an NRF52840 device with an external 32MB flash memory. I need to send memory content to a mobile app through BLE when the user asks for. For now I send...
Hey,
I can view the log info from Nordic nRF to AWS Logs. Now, I'm working on log info to build an application that shows the data dashboard view. Can anyone help me with...
I use nRF52832 DK as the node and RPI as the border router.
I fowllowed the guide setup the border router and flash the example ipv6_icmp to the nRF52832 DK.
The connection...
I have been developing products for nRF52832 and nRF52840 for some years now. I am aware that you have released the NRF Connect SDK. To date I have only used the nRF5 SDK...
We are having nRF51 dongle which is having USB compatible. But My test systems only have the option for DB9 with UART support . Is there any possible to convert nRF51 Dongle...
Hello.
First some background:
I have an application running on nRF52840. Development began with the nRF52832 using nRF SDK 13 or 14. Then migrated to 15.2, 15.3, and finally...
Shalom!
I have a nRF9160 DK board that I am using before our custom hardware prototype is ready. My application is based on the UDP example code skeleton along with code...
Dears,
Is it possible to change the -64dBm threshold to something else in the wireless module? (example: -70dBm, -75dBm).
I´ve seen in some forums that there are other...
Regarding the Nordic guidelines for aQFN, it recommends to use 0.305/0.61 for through hole via pad,
We want to modify the PCB pad as shown in the picture below,
and keep...
Dear ladies and gentlemen,
I found the following page giving instructions for porting an example from pca10056 to pca10056e:
https://infocenter.nordicsemi.com/index.jsp...
