Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hi,
My application requires a Bluetooth range from 90-100meter. Can you guide me if you have any BLE chipset validated with an RF amplifier using a trace antenna? Can I...
Hi,
we configure a GATT Server with a characteristic that is configuered for write with authorization. If we then try to write one byte to this characteristic from the client...
Hello NORDIC and Tech support members. I am new to NORDIAC devlopment please support me how I start with nordiac please guide step by step and please let me know how I Start...
Hi all,
Where can I find the default program that comes with nRF9160 DK in box?
I'd erased memory and programmed with AT command program but I would want to program as...
Nrf51822QFAAC0 uses softdevic: s110_nrf51822_6.0.0-5.beta, sdk: nrf51_sdk_v5_1_0_36092. Use serial routines. When I annotate the initialization of serial port, and annotate...
Hi,
I have successfully implement the code demonstrated in the two tutorials shown here:
https://devzone.nordicsemi.com/tutorials/b/bluetooth-low-energy/posts/ble-characteristics...
Hi Everyone
As the subject mention，
RTT stops working when power is disturbed by motor.
But other fuction that like ble,spi,uart are work well ，
I must cutoff...
Hi,
I am using NRF52832 with SDK 15.2. In the example, UART/Serial Port Emulation over BLE. The documentation says that this example uses hardware flow control. Therefore...
Hi, I just started nRF52 DK from scratch and downloaded several things informed from infocenter like SEGGER, Keil and SDK, but have no background about these things.
The...
I am trying to understand the provisioning process as defined in the Bluetooth Mesh Profile v1.01 specification. In particular, I don't understand the following paragraph...
Some Examples discuss background DFU from application level, but those require bringing in IPv6 stack and TFTP client. Since we are planning to integrate DFU of our device...
I got nrf_cloud_connect failed: -111 error while running asset tracker demo.
I know that I need to flash certificate files according to my previous question: https://devzone...
It looks like the DK comes with a coin cell type battery and there seems to be a tab that can be pulled off to activate. However I don;t see any mention of this in the documentation...
Hello,
I am developing product on nrf52 with sd s112_nrf52810_5.1.0_softdevice. My application caused unexpected sd fault at adress 0x000089B2. I expect it to be something...
