Hi, could you please tell me if my assumptions below correct?
Measuring a (ratiometric to VCC) analog signal and selecting VDD_1_2_PS as the reference selecting AIN_NO_PS...
When I initialize the SoftDevice with SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, false); // Sets up Crystal Source to 20ppm 32.7628kHz
The project I based...
I am trying to make a product with NRF8002B. I finally have the product prototyped. The user will connect to the device, beep, light up, and track. It will always stay on...
Please,
It seems that "Flow Control" signal is not available on nRF24AP2-USB.
EVENT_TRANSFER_TX_START event message appears only one time after the first data packets...
I am looking for cheapest (up to few hundred USD) and simplest Arduino basic solution to track real-time RFID tags distance (also direction if possible) without additional...
Hi all,
I am new to Nordic semiconductor but I could be interessed by nRF9E5. To check if it could fit my requierement, I would like to know if it possible to configure...
Hi,
I am using ADC without external reference and no analog input in order to measure the battery level with a timer (code at the end).
I am also reading several ports...
Hi,
I had used the NXP CLRC663 that need a EMC filter circuit to pass FCC part-15C certification.
nrf5340_NFC EVB havn't the circuit and it only have 2 parallel capacitors...
Hi there,
We are looking for the IAR startup code of the nrf5340 and nrf9160 devices. We have downloaded the MDK already, but only the GCC startup codes seems to be present...
I am using an iPhone Xs and trying to increase my transfer speed using the nrf connect app and a dvk-bl653 kit. I saw that my packets were only 27 bytes and I was only getting...
The nrf9160 tx power is 23DB ；
We is designing a procuct for ODM;
The size of product is small.
TRP requirements 20DB;
So the antenna designs is difficult；
Now my...
pc-nrfutil begins
#!/usr/bin/env python
Although is is not a good idea, the current beta of Mac OS does not contain /usr/bin/python.
This results in error: env:...
Hi,
I set up and testet the Low Power node example, described here:
https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.meshsdk.v5.0.0%2Fmd_examples_lpn_README...
Hello People!
I need to transfer large amounts of information between our custom hardware based on the nRF52832 chip (S132+SDK17), and our custom mobile app running on a...
Hi,
in the .dts file，partitions is
Can it be changed to the following?
This modification does not compile .
What should be paid attention to when modifying,...
I am trying to implement bonding in central BLE uart_app example code but I don't know how to proceed as I'm a beginner . Do we need to make any changes at peripheral side...
Hello Nordic team!
I'm following this tutorial from Nordic to do DFU OTA: https://devzone.nordicsemi.com/guides/short-range-guides/b/software-development-kit/posts/getting...
I am following this post regarding reading the static MAC address for the nRF52840: https://devzone.nordicsemi.com/f/nordic-q-a/68376/trying-to-extract-the-static-mac-address...
Hi, we have a device that reads two sensors on separate i2c buses consecutively and transmits these using ble_nus_data_send().
The i2c sensors are read on an interrupt timer...
Hello all,
I am moving from the Arduino Uno to the nRF52 DK on Segger. A big difference
When looking at the examples, I cannot see the so-called setup() method, so, I...
Dear Forum,
I have the following issue (my System: Ubuntu 20.04):
I created the secure bootloader with Softdevice S140 (v.7.2.0) for 52833 chipset, I use a 52833 Development...
