Hi, could you please tell me if my assumptions below correct?
Measuring a (ratiometric to VCC) analog signal and selecting VDD_1_2_PS as the reference selecting AIN_NO_PS...
When I initialize the SoftDevice with SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, false); // Sets up Crystal Source to 20ppm 32.7628kHz
The project I based...
I am trying to make a product with NRF8002B. I finally have the product prototyped. The user will connect to the device, beep, light up, and track. It will always stay on...
Please,
It seems that "Flow Control" signal is not available on nRF24AP2-USB.
EVENT_TRANSFER_TX_START event message appears only one time after the first data packets...
I am looking for cheapest (up to few hundred USD) and simplest Arduino basic solution to track real-time RFID tags distance (also direction if possible) without additional...
Hi all,
I am new to Nordic semiconductor but I could be interessed by nRF9E5. To check if it could fit my requierement, I would like to know if it possible to configure...
I used J-Link with RIOT OS before. Worked fine. I wanted to use Zephyr now, so I followed the flashing guide. Since I don't want to write scripts to flash it via OpenOCD,...
I have a custom profile containing five custom characteristics.
The largest characteristic is 256 bytes in size and can be read reliably by an iPhone.
When it is sent...
Hi, there is a code comment "Workaround for PAN_028 rev1.1 anomaly 22 - System" in nRF5_SDK_12.3.0_d7731ad\examples\proprietary_rf\esb_low_power_ptx\pca10028\blank. So, I...
I would like to do I2C BlockRead using nRF52.
devzone.nordicsemi.com/.../i2c-block-read When I looked at it, I found that it was not possible to receive variable length...
Project migrated to SDK 15.3.0 with Softdevice S340 6.1.1
Project is using DFU secure bootloader. The example in "dfu/secure_bootloader/pca10056_ble" was used as the starting...
Dear nordic,
I have some doubts regarding PWM. i want two PWM out both are working different frequency and also i need softdevice. I think PWM can make two ways one is using...
Hello,
I want to change the 16-bit of 128-bit UUID at runtime. is this possible?
let me explain...
1)the first both central and peripheral set 128-bit UUID like this...
Hi,
Actually i m new on this field.
I m making indoor navigation by using nrf52840 soc.And i m using sdk15.2.In that sdk i used beacon app code for advertising beacon...
Hi.
I use a modified lightswitch server application with Nordic SDK 15.2, Mesh SDK 3.1.0 and Softdevice 6.1.1.
During provisioning I experience a software assert with...
Hi,
I want the bit rate to be 125Kbit or 500kbit. The project uses 1Mbit and 2Mbit. I'm investigating the topic on the Devzone blog. I reviewed the example nrf52840-long...
My work need to use 4 gpio interrupt, but it not work when use freertos on nRF52832 ,sdk version 15.0.0. My code is like below:
err_code = nrf_drv_gpiote_init();
nrf_drv_gpiote_in_config_t...
I created own app button library. It's just return handler into main with number of pin and type of push - short or long. Also I created library for rgb_led (using nrf_pwm...
