When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
I am planning to migrate to SD 7.0 and SDK 6.0 in order to use the static pass key capabilities. When using the static pass key how should security params be initialized ...
I`m using Ble Mesh Light and Light Switch examples (Gen OnOff models) in two nrf52840 Dongles. The default configuration of the button is that when I pressed the button in...
Hi,
I am trying to interface arducam mini 2mp ov2640 with nrf52840 and I am referring the following github repository: https://github.com/NordicPlayground/nrf52-ble-image...
Hi everyone,
I try to implement DFU on nrf52840 with SDK15.3 and softdevice s140.
I use the secure bootloader ble example and in BLE it works well. But I have an issue...
Hello,
I'm currently developing some firmware for the nrf52811. i currently ran into an memory issue and got stuck there.
i have started from the ble_app_templater from...
Hello
I got error in getting the mac address with available answer( devzone.nordicsemi.com/.../how-to-get-mac-address-using-nrf5340_dk) in forum. I tried to paste that code...
Hello,
I got saadc example on my nrf5340 dk running and now I would like to plot the incoming serial data.
saadc code example: saadc.zip
changed the way I got adviced...
Hello
I use the sample project for alarm (zephyr/samples/drivers/counter/alarm). I was able to build the sample and run it on NRF52DK (PCA10040) with NRF52832.
I tried...
Hi,
I am using window 10
I am trying to connect to the nRF52 DK, but it does not show me the files on the board as it is explained in the how to connect to the DK.
Also...
I have successfully built my project in VS-code for the Thingy:53. Because I don't Have a debug probe I cannot flash the firmware from VS-CODE. What are the files that need...
I was using Power Profiler app with PPK2 for capturing data on long period(48 hours) after 2 hours of running the app is crashed.
Detailed Error message
System Report...
So I am using an nRF5340DK with the "central-bas" example project. I added the MCUBoot-Bootloader by adding "CONFIG_BOOTLOADER_MCUBOOT=y" to the prj.conf file and it works...
I am implementing a port for nRF52832 for our custom communication stack. Devices are time-synchronized, radio operates in destined time slots. During the radio inactivity...
Hi all,
I am using NRF5340 with nRF Connect SDK v1.9.1. And I want to add my own .h and .lib(GCC) file into my project.
Please tell me how to do.
Thanks a lot!
Target nRF52832(nrf52dk_nrf52832) SDK NCS v2.0.0 My project base: \nrf\samples\bluetooth\peripheral_hids_keyboard
Hello. I want to increase Tx power for test. I already...
