I have two nRF9151 DK boards, both hardware revision 1.4.0, both showing the same SIM detection failure.
Symptoms on both boards:
AT%XSIM? always returns %XSIM: 0,9...
Hello,
Can you please provide a PCB footprint and a 3D step file for the IC for the part NRF54LM20B-QGAA-R7? This is the QFN52 package.
Can you also provide reference...
I am using an NPM 1300 with nRF Connect SDK 3.2.4. I am using a 2.8 mAH LiPol battery. I have the termination voltage set at 4.2 volts and the charging current set at 100...
Dear Nordic,
I'm designing a 0.6mm thick 6-layer rigid-flex with the nRF54L15-CAAA, and due to my current stack-up the ground polygon to trace clearance can only go as small...
Excuse me.
When the customer uses the nPM1300 EK for battery charge‑discharge profile logging, after charging completes at 45 °C and the USB cable is unplugged as prompted...
My device uses the nRF52840. I migrated my Zigbee application from nRF Connect SDK v2.5.1 to the Zigbee R23 add-on v1.4.0.
After migrating to the R23 add-on, I noticed that...
Hi!
I'm updating to SDK v1.7.1 and I am looking at the changes in LwM2M Carrier Library v0.20.1. I was previously using LwM2M Carrier LIbrary v0.10.2
The big change is...
Hello,
I'm trying to install circuitpython onto an nrf52833 dk board, and am running into a fair amount of trouble.
Wondering if anyone can provide a guide on the explicit...
Hello,
I am trying to port the 51822 project to 52833. I am testing the port to 52832 temporarily.
The 51822 project is a commercial product.
SDK – 17.1.0 SD-S132, PCA10040...
Hi ,
I check the datatsheet "nRF21540_PS_v1.0.pdf" but I confuse on page 22 "TX_Gain initialized with POUTA_PROD (20 dBm +/- 0.5 dB)".
Which one is correct??
1: Tx gain...
I’m trying to use the Power Profiler app v3.2.0 under nRFConnect for Desktop v3.9.1 with a PPK 1 attached to an nRF52 DK board (containing the 52832 processor), but am having...
Hello, i'm having trouble with my new Board Nrf5340, i cannot detect the board to my PC.
I connected with micro USB and when i'm going to the device manager, i'm not seeing...
Problem:
Tried to compile (west build --board nr52dk_nr52832) the C:\nRF\v1.7.1\nrf\samples\peripheral\lpuart project but it failed to compile. I discovered this after updating...
Hello All,
I am new to use Segger Embedded Studio and NINA-B406 module. I have installed Segger Embedded Studio V5.50d and EVK of NINA-B406 module having nrf52833 SoC. ...
Hello All,
I have taken usbd_ble_uart_freertos example and modified it for USB MIDI example (taken from Github) for nRF5 SDK and modified it to use nRF52833 SoC.
I am...
Hello
We have a project request nrf51822 radio transmitter -> nrf52832 radio receiver
nRF5_SDK_11.0.0_89a8197\examples\peripheral\radio\ transmitter\pca10028\arm5_no_packs...
Hi,
I am developing for custom boards on VS Code and while the new board search in the workspace path is working, I am having issues with it.
When I add another project...
Hi All,
SDK => v17.1.0
IDE => segger
I have a question,according to the picture,I can receive data, but the error will appear after some time.
Why does the function...
When executing "pip3 install -r nrf/scripts/requirements.txt",
according to the instructions on site
developer.nordicsemi.com/.../gs_installing.html ,
I get the following...
