Hi,
I have the issue that my Zigbee device reports the error "Production configuration is not present or invalid (status: -1)". I followed the guide from this( https://docs...
Hi,
I am using an nRF52840 as a Zigbee NCP. I have built the firmware myself using nRF Connect, and I am also running MCUBoot. Sometimes after some usage, the chip starts...
Hello everyone,
I am testing out I2C on the nRF54L15 for a custom PCB project.
I first tested a simple mpu6050 sensor on &i2c21 on pins P1.11 for SCL and P1.12 for SDA...
I have a bit of an unusual use case where the nPM1300 is quite ideal but need to use an external charger for the battery instead of the internal charger. The nPM1300 fuel...
Hello,
We are currently developing with the nRF9151 and would like to request more information regarding GNSS SNR testing.
We have reviewed the documented GNSS functionality...
Hello,
Is the nrf54 family's I2C peripheral compatible with I3C? I need to communicate with several I3C sensors on the same bus.
If yes, is the software support only...
I'm using the nRF Connect SDK on nrf5340dk and encountering issues when trying to use the non-blocking (asynchronous) I2C API.
i am particularly getting this error - ENOSYS...
Hello Everybody,
My development board type is Nordic nRF51 - DK pca10028 board link I press Boot/Reset button and plug in the USB cable, then the LED5 is blinking,Now entered...
Hi,
I would like to connect my nRF51822 board to my PC (Bluetooth 4 compatible) instead of my Android phone.
Do we have a software (in exe) format available for that...
Hello,
I am testing the sample project under \nrf6310\s310\ble_ant_app_hrm.
I just made one modification to bond_manager_init function in main.c:
static void bond_manager_init...
According to the Product Specification of nRF51822, the internal 16MHz RC clock has tolerance up to +-5%. I am wondering what the context of this 5% is. Is it the highest...
pstorage_load and pstorage_clear appear to work fine, but whenever I do a pstorage_store the callback function is never called. This happens whether or not the Bluetooth unit...
Hello Guys,
Everything was working fine with my nRF51822 device but all of the sudden the hardware started not to resume advertisements upon disconnecting from the host...
I have an application which runs successfully when downloaded and executed by my Crossworks IDE and J-Link debugger.
However if I just download the code and detach the...
Hi,
I am using an nRF51DK device in sniffer mode.
I could see devices discovered in the console window.
Launched "Wireshark" tool using "w" command.
I could see the...
Hello,I found in S120 documentation that minimum connection interval for 8 peripheral connected to central must to have minimum connection interval 20 ms.But what is the minimum...
Hi Developers!
I programmed a new code for my custom board's nRF51422, where I use the TIMER1 to generate 500ms interrupts to measure something important with this scheduling...
I was doing some works with ble_app_uart in nrf51822. I have added some modification in the main function according to my requirements. What i have to do is, read data over...
I use master emulator API and I developed a application starting from NRF-usart example.If I send a indication packet from server(nrf51822 beacon-wich use s110 ) to client...
I have created customized services according to nAN36 Document. Everything is fine and it is advertising perfectly.
But issue is I don't have any Android APP for same services...
Hi :
i want advertise mac address out.but i can't scan advertising massage after revising the advertising setting.and my device name length is 24 bytes.so it is better...
