I'm in the early stages of building a Thread + CoAP low-power sensor and using the nRF54L15-Tag as a starting point. Using NCS, the lowest idle current I can get is 13 microamps...
We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Nordic Support Team,
I'm currently working with your Flutter library, mcumgr_flutter version 0.4.1, to implement Device Firmware Update (DFU) functionality. However...
At first you only did that for nrf apps, which was already annoying, but I could live with it: https://github.com/nrfconnect/sdk-zephyr/commit/3239cf77c0ed7c58aefb1f368c8ad17303b16ef5...
Dear Team,
We want to use the Power Profiler II as our ammeter to measure the current of our newly designed PCBA. However, we’re uncertain about the proper connections for...
Hello Team,
we are using Device manager app update to test software updates.
Q1. After choosing the update, there is an option to choose between image0(main), image...
I am trying to work through the Dev Academy - nRF Connect SDK Intermediate - Lesson 3 Exercise 1. I have run into a problem in step 8. At first I couldn't get anything to...
Hello,
I'm a little new to this, so sorry if I'm not asking the right questions. I want to be able to connect my phone to my nRF5340 to use as headset with Bluetooth ...
Hello,
I am looking in the SDK how to get the binding table on the local device. I don't find in the API which
function could give me this table to know the bindings done...
After more than a week of trying different options, settings and changes my AWS_IoT app for nRF9161 is not working. All I get on Serial monitor is this:
*** Booting My Application...
Hello,
i am fighting with getting an simple NUS running. I just followed on the provided example.
But got the error message via RTT: app: ERROR 4 [NRF_ERROR._NO_MEM] at...
I am using nrf54L15-PDK, the GPIO has output voltage at 1.8v, though the supply voltage is 5v. I want to configure OLED display with my board but the GPIO is giving me 1.8v...
I'm looking for an example where the firmware is updated using "DFU over UART from the bootloader" compatible with nrf5340
In my application there is no external SPI memory...
We are currently testing our product which has an nRF9151 SiP.
In order to provision a chip to nRF Cloud, the IMEI and HWID is required. We are already familiar on how to...
I am developing a product that uses Gazell and USB. During development, I am using the nRF52840 due to availability. For mass production, I will use the nRF52833 to reduce...
