Getting Started with nRF9160 DK

Nice Article, I have nRF9160-DK, trying to connect with network with sim card from another provider (They have CAT-M and NB-IoT coverage). I tried to connect module with LTE monitoring app, it always time out. When I tried with AT Client Application with these config and files. 

but I am getting error, can be seen below.

During the installation, I varified every steps and working fine. 

Anybody has similar problem ? 

Have a nice day..:) 

Hi Devang,

Can you click “OK” on the dialog message with the error? I believe it should then open Segger Embedded Studio. From there, can you please give the Segger Output for the error that you are receiving?

Please take this information and post it as a ticket in the DevZone. You may have missed one of the dependencies and you should be able to spot that from the output.

Regards,

Akash

Hello Akash,

Thank you for the quick response. I tried to look output transcript. 

Loading solution at_client.emProject
Executing load commands
cmake -GNinja -DBOARD=nrf9160_pca10090 -DBOARD_DIR=C:/ncs/zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH=C: -BC:/ncs/nrf/samples/nrf9160/at_client -HC:/ncs/nrf/samples/nrf9160/at_client -DEXTRA_KCONFIG_TARGETS=menuconfig_ses -DEXTRA_KCONFIG_TARGET_COMMAND_FOR_menuconfig_ses=C:/Program Files/EmbeddedStudio_ARM_Nordic_v416_win_x64/arm_segger_embedded_studio_v416_win_x64_nordic/html/configure_nordic_project_menuconfig.py
Failed to create ConsoleBuf!
setActiveInputCodepage failed!
Failed to create ConsoleBuf!
setActiveInputCodepage failed!
CMake Error at CMakeLists.txt:9 (include):
  include could not find load file:

    C:/cmake/app/boilerplate.cmake


-- The C compiler identification is GNU 8.2.1
-- The CXX compiler identification is unknown
-- Check for working C compiler: C:/Program Files/EmbeddedStudio_ARM_Nordic_v416_win_x64/arm_segger_embedded_studio_v416_win_x64_nordic/bin/cc.exe
-- Check for working C compiler: C:/Program Files/EmbeddedStudio_ARM_Nordic_v416_win_x64/arm_segger_embedded_studio_v416_win_x64_nordic/bin/cc.exe -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - failed
-- Detecting C compile features
-- Detecting C compile features - failed
CMake Error at CMakeLists.txt:10 (project):
  No CMAKE_CXX_COMPILER could be found.

  Tell CMake where to find the compiler by setting either the environment
  variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path
  to the compiler, or to the compiler name if it is in the PATH.


-- Configuring incomplete, errors occurred!
See also "C:/ncs/nrf/samples/nrf9160/at_client/CMakeFiles/CMakeOutput.log".
See also "C:/ncs/nrf/samples/nrf9160/at_client/CMakeFiles/CMakeError.log".
Project load failed
Reported error: solution load command failed (1)

Seems like some files are missing. 

Hello Akash,

Thank you for your Message. I solved that and flash the at client on nRF9160 and able to pass AT commands.

Hi Devang08,

How did you fix that issue? I am facing the same issue.

Thanks in advance!

Hi Devang08,

How did you fix that issue? I am facing the same issue.

Thanks in advance!