Getting Started with nRF9160 DK

Very nice article! After launching LTE link monitor, i did reset DK and zephyr OS booted but its showing some error 

[1;31m<err> net_if.net_if_init: There is no network interface to work with!

Hello,

Have you tried building the Asset Tracker or the AT Client example using the instructions in this tutorial? The Asset Tracker in the v0.3.0 branch does not support AT commands.

Regards,

Akash

Hello,

Have you tried building the Asset Tracker or the AT Client example using the instructions in this tutorial? The Asset Tracker in the v0.3.0 branch does not support AT commands.

Regards,

Akash

Hi Akash,

Thanks for your reply! Actually after installing the toolchain when i was trying to build any sample project i was getting project build failure error which i saw was being discussed in the past few days in the dev zone forum. But i was unable to fix that issue either. I had posted that issue as well. 

Hi Akash,

I am able to run AT client on DK using other LTE sim. and also fixed the project build failure error on the embedded studio as well. Thanks!