Recent and unreplied - Help your fellow developer and earn points!
Recent Blogs
  • Using GDB with Nordic devices

    The GNU Debugger (GDB) is a popular tool that provides familiar features like breakpoints along with a command syntax that allows creativity in the debugging process. Although its command line interface can be intimidating to some, tab completion mak...
    • 31 Jan 2019
  • nRF52840-DK Range Testing With BLE, ZigBee and Thread Protocols at 0, 4 and 8dBm Transmit Power Settings

    Range testing of any RF scheme is inherently limited by the RF environment, antenna design, tuning and many other factors. The usefulness of range testing is to provide a basis for comparison while keeping as many variables as possible constant. When...
    • 28 Dec 2018
  • Thingy:52 MOSFET Usage

    This blog post describes how you can take advantage of the 4 MOSFET's on the Thingy:52. DISCLAIMER: Please verify all information that is used/retrieved from this blog post. Some of the information might be inaccurate as this blog post has not b...
    • 27 Dec 2018
Latest Tutorials
  • Getting Started with nRF9160 DK

    If you are using your development kit (DK) for the first time, please visit our out-of-box experience here. This will walk you through the set up of getting your DK connected to nRF Cloud running the Asset Tracker application. This guide is written f...
    • 2 Jan 2019
  • Adjustment of RAM and Flash memory

    The scope of this tutorial is to make it clear how a developer can adjust the RAM and FLASH memory start addresses. The examples demonstrated in this tutorial uses SDK 15.2 The first three Sections explains which RAM and FLASH start addresses should ...
    • 7 Dec 2018
  • nRF52840 Dongle Programming Tutorial

    This tutorial demonstrates how to adapt and program SDK example applications to the nRF52840 dongle using USB DFU. It also describes how to program the dongle via Serial Wire Debug (SWD) using an external debugger.
    • 27 Nov 2018