Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
nPM1300 I2C SCL Tf & Tlow timing 0

Hi According I2C standard, there is a requirement regarding falling speed of SCL/SDA which is > 20*1.8/5.5=6.54ns, and our measurement result of Tf on SCL is 5.732ns. ...
4 views

0 replies

Started 28 minutes ago
by Poki Huang
Not Answered
Custom board with nRF5340: after reset firmware does not run and SWD is locked 0

I'm using ncs 3.2.1 with a custom board (Holyiot-20046-v1.0). I used the "Create a new board" function in nRF Connect VSCODE to create the board file. I copied the Zephyr...
7 views

0 replies

Started 1 hour ago
by denis
Not Answered
Xiao Seeed nRF52840 Sense - problem reading microphone data 0

Hi all, I am having difficulties reading microphone data using built-in microphone at Xiao Seeed nRF52840 Sense. I have configured the overlay file as suggested here . Then...
16 views

0 replies

Started 4 hours ago
by jaroslav.psenicka
Not Answered
board failed after update mfw_nrf9151-ntn_1.0.0-1.alpha firmware 0

I Just got nRF9151 SMA board, try to test NTN feature , after following instruction to update so called "alpha" firmware, somehow the board can not reflash back to any vesion...
15 views

0 replies

Started 4 hours ago
by SimonLou
Not Answered
nRF5340 PDM CLK waveform 0

Hi We use nRF5340, set GPIOs as PDM for DMIC device, and measure waveform as below The PDM DATA high level will decrease periodically Is this waveform normal? If yes...
31 views

0 replies

Started 5 days ago
by Poki Huang

Recent in the DevZone Blog

Using the Power Profiling Kit to measure Current Draw on an External Device

notsane0

The Power Profiler Kit (PPK) is a flexible tool for measuring the real-time current draw of nRF5x designs. When used as an add-on board to measure the nRF5x current of an attached development kit (DK)…
- 26 Dec 2018
What impact does the deprecation and withdrawal of Bluetooth Core specification v4.0 and v4.1 have on your current and future products?

Petter Myhre

This blog was last updated 17.01.2019. The Bluetooth Special Interest Group (SIG) recently announced the deprecation and withdrawal of Bluetooth Core specifications v4.0 and v4.1. For products that are…
- 30 Oct 2018
The S132 v5.1.0 is now production tested on nRF52810

Petter Myhre

This blog describes how you can setup a Segger Embedded Studio example for PCA10040E (emulating nRF52810) from nRF5 SDK 14.2 to use S132 v5.1.0, instead of S112. The procedure should be similar for the…
- 12 Sep 2018
Adding custom commands to a BLE example using Nordic UART Service

Håvard

A common thing to do is to use the Nordic UART Service for quick prototyping. Often the example itself is used as a starting point (ble_app_uart). But sometimes we use other starting points, and want to…
- 6 Sep 2018
Using Two-Factor Authentication (2FA) with the Nordic DevZone

esivertsen

Did you know you can use two-factor authentication to enhance the security of your DevZone account? In this little blog, I’ll show you how to enable Two-Factor Authentication (2FA) with your DevZone account…
- 30 Aug 2018
Introduction of SDH and SDK v15.0 software architecture

Amos Lin

The SDK software architecture has been hugely changed since SDK v13.0. With adding SDH to SDK, it provides SDH API to Enabling the SoftDevice and its event interrupt. Disabling the SoftDevice. Receiving…
- 13 Aug 2018