Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
how to obtain a fixed BLE MAC address when CONFIG_BT_PRIVACY is defined 0

Hi, I am using nrf52840 to develop a product. I use NCS sdk v2.5.0. I developed a project based on the [Bluetooth: Central HIDS] example in the NCS SDK. This example enables...
15 views

0 replies

Started 5 hours ago
by zhuweihua163
Not Answered
Setting CONFIG_BT_CTLR_DATA_LENGTH_MAX=251 but payload is limited to 229 bytes. 0

We are running an HCI controller on nRF52833 based on the Zephyr hci_uart sample code. We are using the Zephyr 3.7.0 LTS version. We have set CONFIG_BT_CTLR_DATA_LENGTH_MAX...
15 views

0 replies

Started 6 hours ago
by Mike.Redd
Not Answered
Disable and enable BLE OTA/DFU service 0

Hi, Platform: nRF54L15, SDK 2.9 The application is Matter + BLE. CONFIG_CHIP_DFU_OVER_BT_SMP & MCUBoot are part of the configuration. As soon as we enable the BLE...
15 views

0 replies

Started 7 hours ago
by SubuMuthu
Not Answered
Ring Buffer Maximum Size 0

Hello, I'm reading about 700 values from an LSM6SDO gyro/accelerometers per second and need to store them, before sending them over bluetooth once where I store them is...
13 views

0 replies

Started 7 hours ago
by connorshannon
Not Answered
Flash nRF52840 dongle with Sweyntooth firmware 0

Hi, I was trying to flash the sweyntooth firmware to nRF52840 dongle using nRF connect for desktop. I was following the instruction on in this tutorial: . The hex file I used...
15 views

0 replies

Started 7 hours ago
by DavidXie

Recent in Nordic blog

An Introduction to Trusted Firmware-M (TF-M)

Sigurd Hellesvik

Nordic Semiconductor recommends following the PSA Certified IoT Security Framework in your product development process. The four-step process of analyze, architect, implement, certify, provides a framework…
- 13 Sep 2022
LTE-M vs NB-IoT Field Test: How Distance Affects Power Consumption

Martin Lesund

This is an updated field test of the one we did in 2019 at the same location. During this updated field test, we also captured more parameters for both LTE-M and NB-IoT devices and, we captured power measurements…
- 8 Sep 2022
On nRF Connect for the Mac, the new nRF Edge Impulse and the Discovery of SwiftUI

Dinesh Harjani

Preface The bulk of the development work described in this blog post occurred during the 2021 calendar year. This means it reflects the state of iOS, Mac, Swift, and SwiftUI Development before and after…
- 1 Sep 2022

Latest guides

Software and Protocols: Automating nRF91 TLS credential management via serial port AT commands

Daniel Veilleux

I have spent a bit of time recently experimenting with different TLS credential configurations using nRF91-DKs. Eventually I got to the point where I wanted to do things like swap out the certificates…
- 10 Jan 2020
Getting started: nRF Connect for Cloud Certificate Update

Joakim

The content of this guide is now covered in the documentation on nrf Connect SDK documentation page.For the most up-to-date instruction to Update Cloud Certificate please follow this link.
- 27 Sep 2019
Getting started: Thingy:91 Firmware Update using MCUboot

Joakim

The nRF Connect Programmer application now also supports MCUboot! Follow these steps to update through the programmer application or the following guide for the command line alternative. This guide shows…
- 23 Sep 2019
Bluetooth low energy: Concurrent Advertising

Håvard

I have been asked several times about variations of the following advertising scenario, so I decided to make a blog post that I can refer to, and hope it might prove useful for others out there that are…
- 9 Sep 2019
Software and Protocols: The four kinds of data you need to consider when developing an IoT product

Markus Tacker (he/him)

In this post I will give you an introduction to the four kinds of data you need to consider when developing an IoT product: Device State Device Configuration Past Data Firmware Updates It's these …
- 9 Sep 2019
Getting Started : Automate building of HEX files for your nRF Connect SDK application using CircleCI or GitHub Actions

Markus Tacker (he/him)

Continuous delivery is in important aspect of short time to market and since the nRF9160 supports firmware over the air updates we want to ship a new firmware to our development boards every time we update…
- 14 Aug 2019