Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
nRF54L15 Errata 39 question 0

The workaround says: " Trigger TASKS_PLLSTART before TASKS_XOSTART is triggered and trigger TASKS_PLLSTOP after TASKS_XOSTOP is triggered." I would like to start HFXO...
14 views

0 replies

Started 1 hour ago
by Emil Lenngren
Not Answered
Bluetooth OTA Speeds on NRF5 SDK vs Zephyr 0

I have been working on a project using a nrf52832 and currently have the firmware developed on nrf5sdk. I have been testing out Zephyr with this example https://docs.nordicsemi...
- development
- software
- nrf52832
- bluetooth le
- dfu
23 views

0 replies

Started 3 hours ago
by wilcockj
Not Answered
NRF52 RX radio channel scanning receive probability 0

Hi, SDK17, SES. NRF52840 host receiver. NRF52810 custom board asynch transmitters, Proprietary radio. Assuming there is a handful of NRF52810 asynchrounous "slave" transmitters...
25 views

0 replies

Started 3 hours ago
by astomi
Not Answered
Firmware randomly hang for minutes or hours 0

Hello all, First, thank you for the support and community here, which is very helpful. I have been developing a device using the XIAO nRF52840 device. (link: https://wiki...
64 views

0 replies

Started 4 hours ago
by Martin Hammerchmidt
Not Answered
Mesh application threading 0

Hi Nordic, I have a general question about kernel threads in the mesh stack. From memory, Bluetooth has its own thread in the stack I think. At some point in the stack the...
20 views

0 replies

Started 5 hours ago
by mneber

Recent in Nordic blog

IoT Contest - Mini-Weather Station - Project

buleks

The role of this device is remote measurement environment parameters. It could be accessed anywhere where access to the internet is possible. It uses 6LoWPAN because it's modern IoT technology and have…
- 9 Jul 2015
External nRF51822 SWD Programming using the nRF51-DK

Mahesh Venkitachalam

I've written up a note on programming external nRF51822 boards (like the RedBearLab Nano) using the SWD interface of the nRF51-DK. http://electronut.in/nrf51-dk-external-programming/
- 9 Jul 2015
Getting started with nRF51822 and GCC - transmitting LDR light levels over BLE

Mahesh Venkitachalam

I've written up a simple project that uses the nRF51-DK to send LDR light levels over BLE using the Nordic UART Service (NUS). In the process, I have set up a cross-platform toolchain (OS X, Windows) using…
- 8 Jul 2015

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021