Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered

How can I ensure not be Interrupted by radio when I use gpio simulate IIC? 0

My sensor is off-standard,so I have to use gpio to read and write my sensor. Gpio IIC will take about 0.5ms to get data. My app need send data every 7.5ms,it seems that...

772 views

0 replies

Started over 10 years ago
by gootoomoon
Not Answered

Service Discovery Fails on Nexus 4 Android application 0

Hi, My android Proximity application fails on service discovery only for the very first time it connects with the devices(nrf51822 evaluation kit with sdk 5.2.0). Actually...

851 views

0 replies

Started over 10 years ago
by balaji
Not Answered

Convert AN34 DTM Python script to C# 0

Has anyone converted the app note AN34 DTM Python script to C# or C/C++ ? The Python DTM script is works OK with the setup specified in the app note AN34 figure 2, which...

1473 views

0 replies

Started over 11 years ago
by Virgil Gomes
Not Answered
nrf51822 UART Lost bit 0

Hi, I have a serious problem, when I use uart of NRF51822 QFAAC0 to receive data from another MCU, I found that it will lost one bit at same position everytime. my SDK is...
- uart
- nrf51822
1405 views

0 replies

Started over 11 years ago
by Terry
Not Answered
Bluetooth low energy (Re-connection with tags ) 0

please go through the images for better understanding of the problem (as in sequence of 1-5):- any kind of help would be appreciated....
1040 views

0 replies

Started over 11 years ago
by sarang

Recent in Nordic blog

Keil in-line program through DFU BLE

scytulip

I am investigating Master Emulator API and found something interesting that can help you program your device through BLE DFU in Keil. This method calls the python script used in MCP. If you can use MCP…
- 29 Oct 2014
Nordic Semiconductor nRF51822 Firmware for Background Data Recording

scytulip

#Nordic Semiconductor nRF51822 Firmware for Background Data Recording Updating on https://github.com/scytulip/nrf51-back-rec Design Objective This firmware is designed for low-cost long-time low-power…
- 23 Oct 2014
Nordic nRF51822 ARM Cortex-M0 Development using emIDE

Hugh

Nordic nRF51822 ARM Cortex-M0 Development using emIDE To avoid the hefty charges with commercial compilers I tried emIDE with some success; here are the settings I used for the EV Kit Official emIDE…
- 22 Oct 2014

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021