This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

nRF9160 SES project load

Hi Team,

May I know your kind advice on the following issue when I tried to Open the SDK project in SES. I have seen some discussions on line but none of them works for me. I am using Win10 64bit OS. Thanks.

Loading solution at_client.emProject

Executing load commands

cmake -GNinja -DBOARD=nrf9160_pca10090 -DBOARD_DIR=C:/ncs/zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH=C:/gnuarmemb -BC:/ncs/nrf/samples/nrf9160/at_client/build -HC:/ncs/nrf/samples/nrf9160/at_client

Project load failed

Reported error: solution load command failed (-1)

Thanks.

Top Replies

Parents

0 Otso Jousimaa over 7 years ago

I'm having the same issue.

SES: V4.14,
OS: Mac OS 10.14.2
Python: 3.7.2
GCC: Gnu 7.3.1

I've set up the project as instructed in Getting Started assistant 0.5.1. So far I've tried steps here, here and here .

GCC is rolled back to 2018 q2
I've tried compiling the samples under zephyr directory
I've unset ZEPHYR_SDK_INSTALL_DIR and sourced zephyr_env.sh (and ran SES with the same terminal)

The getting started assistant fails verifying cmake and python3, however the programs are found by `which cmake` and `which python3`

My SES Target & Output log:

Loading solution asset_tracker.emProject
Executing load commands
/usr/local/bin/cmake  -GNinja -DBOARD=nrf9160_pca10090 -DBOARD_DIR=/Users/otsojousimaa/git/ncs/zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH=/opt/local/gcc-arm-none-eabi-7-2018-q2-update -B/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker/build -H/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker -DPYTHON_EXECUTABLE=/usr/local/bin/python3 -DCMAKE_MAKE_PROGRAM=/usr/local/bin/ninja -DDTC=/usr/local/bin/dtc
Project load failed
Reported error: solution load command failed (-1)

My asset_tracker.emProject, note the `"` and `&` in the file:

<!DOCTYPE CrossStudio_Project_File>
<solution cmakelists_end_section="# NORDIC SDK APP END" cmakelists_file_name="/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker/CMakeLists.txt" cmakelists_project="asset_tracker;build;libapp.a" target="8" version="2" source_directory="/Users/otsojousimaa/git/ncs/zephyr" board_directory="/Users/otsojousimaa/git/ncs/zephyr/boards/arm/nrf9160_pca10090" dts_compiled_file_name="/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker/build/zephyr/nrf9160_pca10090.dts_compiled" build_directory="/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker/build" dts_overlay_file_name="/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker/nrf9160_pca10090.overlay" load_command_environment="ZEPHYR_BASE=/Users/otsojousimaa/git/ncs/zephyr" cmakelists_start_section="# NORDIC SDK APP START" Name="asset_tracker" load_command=""/usr/local/bin/cmake " -GNinja -DBOARD=nrf9160_pca10090 -DBOARD_DIR=/Users/otsojousimaa/git/ncs/zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH="/opt/local/gcc-arm-none-eabi-7-2018-q2-update" -B"/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker/build" -H"/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker" -DPYTHON_EXECUTABLE="/usr/local/bin/python3" -DCMAKE_MAKE_PROGRAM="/usr/local/bin/ninja" -DDTC="/usr/local/bin/dtc" && $(StudioDir)/bin/ninja_import zephyr/zephyr.elf zephyr/liboffsets.a zephyr/liboutput_lib.a zephyr/libpriv_stacks_output_lib.a zephyr/app_sizing_prebuilt.elf zephyr/zephyr_prebuilt.elf zephyr/zephyr_app_sizing_prebuilt.elf zephyr/priv_stacks_prebuilt.elf">
  <configuration properties_filter="Debug" arm_target_device_name="nRF9160" debug_target_connection="J-Link" debug_register_definition_file="$(PackagesDir)/nRF/Device/Registers/nrf9160.svd" arm_architecture="v8M_Mainline" external_link_command=""$(ToolChainDir)/arm-none-eabi-gcc" $(Objects) $(LinkOptions) -o "$(RelTargetPath)"" arm_core_type="Cortex-M33" external_assemble_command=""$(ToolChainDir)/arm-none-eabi-gcc" $(AsmOptions) -MD -MF "$(RelDependencyPath)" -o "$(RelTargetPath)" -c "$(RelInputPath)"" Name="Common" external_c_compile_command=""$(ToolChainDir)/arm-none-eabi-gcc" $(COptions) -MD -MF "$(RelDependencyPath)" -fno-diagnostics-show-caret -o "$(RelTargetPath)" -c "$(RelInputPath)"" arm_fpu_type="FPv5-SP-D16" external_archive_command=""$(ToolChainDir)/arm-none-eabi-ar" -rcs "$(RelTargetPath)" $(Objects)" linker_section_placements_segments="FLASH RX 0x00000000 0x00100000;RAM RWX 0x20000000 0x00040000" source_code_control_directory="/Users/otsojousimaa/git/ncs/zephyr" build_toolchain_directory="/opt/local/gcc-arm-none-eabi-7-2018-q2-update/bin" debug_start_from_entry_point_symbol="No" arm_target_interface_type="SWD"/>
  <folder path="/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker" filter="nrf9160_pca10090.overlay" Name="dts files">
    <configuration Name="Common" c_user_include_directories="/Users/otsojousimaa/git/ncs/zephyr/dts/common" c_system_include_directories="/Users/otsojousimaa/git/ncs/zephyr/include;/Users/otsojousimaa/git/ncs/zephyr/dts/arm;/Users/otsojousimaa/git/ncs/zephyr/dts"/>
    <file file_name="/Users/otsojousimaa/git/ncs/zephyr/boards/arm/nrf9160_pca10090/nrf9160_pca10090.dts"/>
    <file file_name="/Users/otsojousimaa/git/ncs/zephyr/boards/arm/nrf9160_pca10090/nrf9160_pca10090.yaml"/>
    <file file_name="/Users/otsojousimaa/git/ncs/zephyr/dts/common/common.dts"/>
    <file file_name="/Users/otsojousimaa/git/ncs/nrf/samples/nrf9160/asset_tracker/build/zephyr/nrf9160_pca10090.dts_compiled"/>
  </folder>
  <import can_modify_solution="No" file_name="build.emProject"/>
</solution>

I can run the SES load command to configure the project and then `ninja` in terminal to compile the project without errors, although I've not flashed the binary to dk.

Reply