Hi everyone,
I use the ble-app-buttonless-dfu example to develop my application.
I make a mutual authentication to be sure the device is connected to the right mobile...
To read the MAC addresses defined I use the following code (with CONFIG_BT_ID_MAX =2 in prj.conf):: :
bt_addr_le_t addr [ CONFIG_BT_ID_MAX ]; //space for random address...
Dear Nordic Engineers
The following documents are our hardware designs. When we conducted the test, we found that we couldn't obtain the GPS satellite signal and the 4G...
I’m using the Zephyr nordic,npm1300-charger driver on an nRF52840 to control the nPM1300 PMIC charger. At runtime I need to be able to turn charging on and off—on command...
Hello support,
For our project we have an integration with Memfault for metrics, coredumps and log files.
We are currently developing in NRF 2.7.0 on a nrf9160 chip. ...
Hi everyone,
I'm developing a BLE application where I measure throughput between an nRF5340DK acting as peripheral and an nRF52 Dongle as the central (using a Python script...
Hi Nordic Team,
Previously, with the nRF52840, we could use the internal ADC channel to directly measure the supply voltage (VCC) for battery monitoring without external...
Hello,
We are facing a critical issue with our BLE peripheral product under development crashing during paring/bonding.
The phones used are all different, but the ones...
Hi all,
I want to know if the images inside the hci_dfu_send_hex folder are just precompiled hex files from the examples.
More specific I want to use the bootloader...
Hi
I have 3 nRF52840 DK, just shipped this week.
And two could power on success.
But one failed to power on after connecting with same USB cable.
The LDE5 did not...
Dear all,
I have designed custom board using Raytac mdbt40(nrf51822) module on my board and programming using nrf51DK my setup is like
VnRF: not used
VDD: not used...
He guys,
I'm currently trying to run the secure serial bootloader sample on our hardware which is based on the nrf52832, but the sample code resets the device when starting...
Hi
I develop nrf52840 and nrf52832 of our's RTOS environment(with. GCC).
I want apply mesh protocol with nrf52832 and nrf52840.
I ask,
when does support...
I try create my own app based on buttonless app. I've tested dfu over the air it's ok. But for that I need to firmware bootloader (with security key) before. It's ok for production...
Hi,
I dont get the Light Control example to work. Other examples from the normal SDKs are working.
I have 4x PCA10040 Dev-Kits.
I flashed the example with SEGGER...
We're having a range of issues with a firmware that I cannot detail due to NDA.
Hence we're looking for someone proficient with nRF51/52 using SD130/132 for reviewing/assisting...
Hi,
We can currently nRF51822 beacon kit. I want to know that do you have other beacon kit which have high range and in this large broadcast data can be broadcast ??
...
Good morning.
I use Google Translator to transcribe my articles.
Please understand if the context is not right.
I am currently testing HID Protocol with a mobile phone...
Hi guys,
i'm experimenting with ble_app_multiperipheral example from sdk14 and am having some issues.
I have made some modifications to be able to read and write characteristics...
Hello!
We experience problems trying to connect from Samsung Galaxy A5 (2017) to BL652-SC-01 module that runs serialization on a custom board: the smartphone is stuck at...
Hello, let it be clear that I could be wrong on this, but so far, based on the example provided by the nordic semi, I got the impression that the ble mesh is built almost...
Hello Nordic People,
Today I visited the NordicTechTour in Eindhoven, NL.
At the end we were given the "thingy" - quite interesting and useful hardware thingy.
However...
