Hi,
I am attempting to get Direct Test Mode working on my nRF54L15 while also having access to the normal BT stack.
Normally, if I run dtm_tr_init(), I can begin the test...
Hello,
We upgraded our project to nrf connect sdk v3.0.2 from v2.9.0 and can no longer use pin 0.00 and pin 0.01 as gpio. The problem seems to be in the nrf53 soc.c file...
Hi,
I am testing the Bluetooth function on my custom board with nRF5340 CLAA chip. I have tested the clock, I2S and SPI on this chip previously and they all worked perfectly...
I'm having some trouble connecting to the onboard jlink with the NRF9151 devkit that I've recently received. The quickstart seems to detect the NRF9151 dev kit, but when I...
We have been evaluating the nRF5340 and nRF7002 for use in a new product and we are currently looking at our Wi-Fi FOTA options. For reference, we are using an nRF7002 DK...
Hi Nordic team,
We are developing two types of devices based on the Zephyr examples:
periodic_adv_rsp
periodic_sync_rsp
Our design uses the following...
Hello,
I've a battery based device that uses a buck/boost to efficiently use entire battery voltage range (4.2-3.0) . This component have a low quiescent current between...
Hi all,
is there a way to set a characteristics when a read command arrive from APP, or it's necessary to set it before to read?
I see for example battery service, it...
How do I get data from a scan response packet using master emulator?
I do know about
BtScanParameters scanParams = new BtScanParameters();
scanParams.ScanType = BtScanType...
Hi, Nordic
Now, I have one nRF24 Dongle, two nRF52 devices.
two nRF52 devices will send data to nRF24 via ESB(gzll), but need to pair.
Can two nRF52 devices can pair...
What is the most energy efficient microphone input method, PCM via I2S or PDM. Does the SoC have a special HW handling of the PDM format for converting to PCM? Does the filtering...
Hello,
I am developing custom HAL driver for TWIM in NRF52 (PCA10040). The problem is that after the slave device stretches the clock signal, ninth period on SCL clock is...
Hi, i use the original ble_app_template (sdk11) with two lines of code added by me (See below) which erase the last page in flash (flash_page_erase((uint32_t *)(pg_size *...
Can you tell me what is the main different between nRF52832 and nRF51822 and can you send me following information about these products and nRF51822 Bluetooth Smart Beacon...
Hello ,
I'm working on custom board, I'm trying to disconnect from the Central (Andriod app) when the battery is below certain level and stop re-advertising.
Below is...
Hi all,
Is it posible to set notify and read for one characteristic ?
I ask because Android offer me read or notify method.
I need read value from characteristic on Android...
Hi,
I am trying to implement dfu in one of my application, I am following the instructions detailed at this link , but I am meeting the following problem :
When I tried...
I am using the timeslot API and softdevice to advertise two separate types of message. This works well. But I have also used ble_radio_notification_evt_handler_t in an attempt...
I'm trying to remove the debugging UART statements to reduce power consumption, however, not initializing the UART seems to hang the system right after advertising start,...
Hi,
I am using Nordic SDK9.0.0 and softdevice S310.
I want to develop dual bootloader(UART + BLE).
I have problem after merge both bootloader. Induavidual example...
Hi!
Regarding the __initial_sp in the map, studied some articles on the web and even map file: used as STACK for arm_startup_nrf52840.o!
Ok, let us have an example ...
