Using one ADC, the current can be reduced to about 40uA after the ADC value is taken. Using a two-channel ADC, after the ADC value is taken, the current stops at about 0.4...
I'm searching for a software engineer who can help us getting OTA support between nRF52810 and PIC16 MCU.
nRF52810 must have command- and data mode over UART, Pic controler...
I want to be able to read the gyro and accelerometer values from the MPU6050 sensor.
As a base start I downloaded the NRF5 SDK V15.3.0 and modified twi_sensor_pca10056 program...
Hi. I'm using nRF52832, SDK13.0.0.
I should use SHA256 and MD5.
I made my code as below.
NRF_CRYPTO_HASH_CREATE(init_packet_hash, SHA256); NRF_CRYPTO_HASH_CREATE(init_packet_md5...
Hi. I'm using nRF52832, SDK13.0.0.
I want to use SHA256 as below.
output32Byte = SHA256[input32Byte];
Which function or example can I refer to?
And also I want to...
I tried to port the example "ble_app_ipsp_initiator" to pc-ble-driver and run on Linux. The peer device is another PCA10056 device running ble_app_ipsp_acceptor. The problem...
hi...
i want to use two uarts in nRF52840 , one uart to one pc and another uart to another pc .Data should be transferred and received between the nRF52840 and pc how can...
Hi,
I have this setup:
MacBook -> iMCU USB (J2) <-> nRF5340 DK <-> P19 Debug Out -> My PCB board
I can currently flash my nRF 5340 successfully and I can connect using...
I currently have a self-developed 5340 development board, using the Bluetooth transparent transmission routine. These are my current main.c file, device tree file, and configuration...
Hi! We have three different uart applications (two for production use, and the uart shell backend) and three different hardware output paths, but nRF52840 features just two...
Successfully programmed via SWO (Debug connector to programmer/VSCode)
Successfully programmed via NRF Connect Programmer using J-Link SWO
Checked power rails to be 1...
Hi Nordic，
I encountered a strange issue when compiling and flashing my nRF5340 project with NCS v2.9.0.
On the first flash , everything works fine. Bluetooth starts...
Hey Team,
I have a custom board based on the NRF52840 and I want to create a profile for my battery using nPM PowerUp. the nPM1300-EK has onboard nPM controller and USB...
Description:
Hello Nordic team,
I’m using the Mikroe nPM1300 PMIC Click Board (based on the Nordic nPM1300 PMIC ) with an ESP32 over I²C to charge a Li-ion battery . ...
Hi, I am seeing this weird behavior on my custom board. I have an npm1300 with nrf5340. The npm1300 stops working after the power fail comparator triggers at 2.8V, since the...
After I used the migration script to migrate my boards from the HW V1 to V2 I started getting this issue.
I get it across two diffrent boards, I tired other versions of...
Hello, I'm starting to build/develop a project around the ISP2053 (nRF5340 module) and I'm a bit confused with the schematics. In some of the schematics, there is a "VDD_nRF...
Hi,
I am trying to subscribe to notifications from a peripheral device on my central device. The peripheral has more than 3 characteristics, but I am only able to successfully...
Hi,
DFU over UART is failing on NCS V3.1.1. I have a project file that works fine with V3.1.0. When I query the image information, MCU responds immediately. But when I rebuild&flash...
I now need to make a program on nrf5340 audio DK, SDK v3.0.2 to scan auracast and print the information in the subgroup in PA, without sink BIS.
In addition, it needs to...
Hello,
I am trying to use the drivers from the following repository: https://github.com/too1/ncs-arducam-mega-driver
I and using the latest version of the NCS 2.2.0, I...
Hello,
I get this error when I try `nrfutil device list`, and any other nrfutil device command.
However, if I use `nrfutil device --jlink-dll /path/to/libjlinkarm.so...
