Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hi there,
We're using NRF52840 and nRF5_SDK_15.3.0_59ac345. We have a product where 2 nRF52840's have to talk to 1 device (say, an iPhone or a computer). We were thinking...
I've noticed when using the nRF Connect Software, after I connect to a perihperal, it immediately discovers services, but takes about 4 seconds to read the GAP Device name...
Hi,
We have been working with a coordinator and a router device based on nRF52840 with nRF5_SDK_for_Thread_and_Zigbee_v4.0.0_dc7186b
Both devices are Zigbee 3.0 and implement...
Hello,
What the average data consumption for using A-GPS on the nRF9160 to download the Almanac and Ephemeris data? I would like to know how much data is billed through...
Hi,
I am developing a product based on SDK v15.3.0 and SoftDevice v6.1.1. my product acts as a BLE central device.
On the peripheral side, is an iOS application which...
Hi,
I need some help in explaining the GPS behaviour I am observing. In the following figures the GPS current draw is depicted.
For the specific scenario the position...
Hi,
I'm testing stability of my firmware. As a part of tests I'm trying to maintain long term (multiple days) connection between nRF52 and nRF Connect for Android app running...
Hello, i have a routine that updates the firmware in Application Core flash. It works erasing the flash and receiving the srec data with TWI slave (waiting for USBD).
Now...
Hi, I have developed an application for nrf52810 and now it needs an additional feature of saving several integer values to flash, so they are available even after power loss...
Hi,
Is it possible to add other, optional data pages to ANT+ BPWR profile? For example page 0x13 (Torque effectiveness and pedal smoothness)?
Thanks,
Pepam
Hi NRF Team,
My Configuration:
NRF51822
S130
SDK 12.2
I am using multiple application timers in my project. Most of the cases timers has to run concurrently. Lets...
Hi Team,
we are using the nRF52840 for our development purpose. we need sample code for Stack overflows/under flow and Memory leaks detection in runtime by using MPU....
Hello,
I have a central and Peripheral beacon on nrf52832. I am usıng nus services on both devices. After the data transfer I call the
ıt works fluently on the central...
I have been using CrossWorks for a while for multiple vendors MCUs (sometimes in the same project on the same PCB). I'm looking at using nRF Connect SDK and see that SES is...
I'm using SEGGER Embedded Studio with nRF5 SDK v16.0.0.
For the purpose of high-speed data transfer, I've searched about the BLE throughput.
Now, I want to figure out...
