I'm looking at interfacing a typical Wheatstone bridge sensor to the nRF51822 ADC. This particular sensor only requires a mA or two for excitation and the output fits within...
When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
Hi, I'm trying to use the light_switch example in the Mesh SDK 2.1.1 to build a small experiment to count how many messages are received by the server when sending a consecutive...
Hello,
I am trying to do USB DFU on (NRF52840 with SDK 15.2) but when i run the nrfutil command it gives an error:
command: nrfutil dfu usb_serial -pkg ble_hrs_combo...
I've setup, compiled and run the BLE Beacon project an have made some changes. Now I need to enable the UART. Simply adding UART files to the project does not work due to...
Hi
We've developed a wearable device and are changing from a rigid PCB to a full flex PCB. I want to know what adjustments is needed for RF output because of this change...
I am running an example from Mesh SDK (v2.1.1) named "ble_app_uart_coesixt". I see device in Bluetooth list, everything is ok. But I need to provision this device using my...
Hi,
I am using a Sparkfun nRF52832 dev board and SES with the Jlink mini to program it.Our project involved the ability to use the micro as a keyboard so I am playing with...
I am working with NRF52832 and S132. I have successfully captured signals with the ADC (with RTC events at a frequency of 500Hz) and synchronized them using this beacon/scanner...
Hello,
I am working on few projects involving nRF52 DK's using the nRF52 15.2.0 SDK. I would like to know which would be a more efficient and reliable way of changing...
We are considering using the nRF52832 / nRf52840 for a smart lock application with a capacitive touch keypad. Currently the product is using a Cypress Cap sense product for...
Hi,
I know that the secure bootloader uses different mac address to force services discovery however i would like to keep the same
address for both software parts as it...
Good day, I am having serious problems flashing my custom NRF5282 board. I started with Openocd, using the st-link v2 debugger and I was able to connect to the device and...
Hi,
I'm on Linux (openSuse Leap15 and Debian) and got so far that I can program nRF52832 and debug with breakpoints and local variable display with this USB breakout "BLE...
Hello!
For a project I'm working on, there is the need to use a microSD card. In the past I have used a custom FatFs port (was using SDK 6), but now I was happy to discover...
Hello,
I am using the module nRF52840 and nRF SDK 15.2.0. I would like to start a PWM, going to sleep mode and still having the pwm running.
I tried combining the pwr_mgmt...
Hello.
I have one of these dk and one thingy52 and I would like to connect them to mesh network, I read somewhere that I can use my phone as provisioner so is it possible...
