I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
Softdevice 6.1.1
SDK 15.3
We have been using the nrfx_uart driver but realized we need to have multiple instances on our new hardware so have changed to using nrfx_uarte...
We're having trouble reading more than 2 bytes from BLE NUS. SDK 16. Software based in ble_app_uart but running custom board (no buttons, no LED), this is a ble peripheral...
Dear Sir or Madam,
i currently start developing with nrf52833 dev board. For the software examples from SDK16, how can I see, which version of software (pca10040/e, pca10056...
I need to pass a stream of data from raspberry pi 4 to PC through Ble. I can successfully build and run \examples\peripheral\usbd_ble_uart. It can communicate with my android...
Dear Nordic Folks,
Greetings! I see that nrfutil.exe dfu serial is used to update nRF52840 when using secure_bootloader_uart_mbr_pca10056.
Does Nordic provide c-code implementation...
Hi,
I am encountering some difficulties to undertand the context in which my sdk modules call back are called. I am using the uart part of ble uart nus example, and thus...
based on nRF SDK 16 radio (peripheral) example, in radio_config file, i set registers of TXPOWER, FREQUENCY, MODE, PCNF0, PCNF1 (and ADDR and CRC related registers) and also...
Hello, my company wants to get started with BLE direction finding. Maybe you can help me on how to setup some hardware. NRF52833 DK seems suitable but then I have no clue...
We are finishing up a project with the nRF52832 based on the Nordic Thingy. Most of what we want it to do are normal functions of the Nordic Thingy. It connects to a mobile...
Hi ,
Im trying to read and write data from QSPI w25q32jv chip, for which i get faulty data .
I have used this example : https://github.com/jimmywong2003/nrf52840-QSPI...
Hello,
I am very new to BLE and NRF and trying to understand what the best way would be to send data from one device to another
From the documentation and messing around...
Based on nRF5_SDK_15.3.0_59ac345 at NRF52810 development board, 1. Enable the watchdog with reload value = 2000, and feed it per 1000ms by app_timer 2. Initialize the FDS...
Hello,
I'm finishing migrating to the newest SDK from SDK 13.1. I'm having problems using the BLE_ADVERTISING_DEF macro, it doesn't compile.
The reason appears to be somewhere...
Hi,
I am fairly new to this, so please excuse my beginner mistakes.
I have a few coin battery sized nRF51 beacons (like this https://forum.mysensors.org/topic/6951/nrf5...
Hi teams,
I want to find GAP address of sending node after received message.
In client model callback, there is access_message_rx_meta_t argument, and I can get unicast...
