SDK_9.0.0
I was trying to implement 2 different UART connection parameters so I decide to use re-initialization.
My initial parameters included APP_UART_FLOW_CONTROL_LOW_POWER...
I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
I'am studying the ble examples under SDK16.0.0. In the Uart example, the structure of ble_advertising_init_t is used to initiate the advertising module. However, the stucture...
Hello,
I was trying to make fatfs example work on my nrf52_pca10040 board, but it always fail to init (<info> app: Disk initialization failed.)
I'm using a 4GB sd card...
Hi all,
We have a running project with Nordic SDK on thread.
Now, we are considering to include some ble functionalities in our application and use freertos to manage...
Hi,
I order one nRF5340 PDK from Mouser.
I am following the get started document.
https://infocenter.nordicsemi.com/topic/ug_gsg_ncs/UG/gsg/first_test.html?cp=1_1_2_3...
Hi,
I recently purchased a DK as well as 5 nRF52840 chips. I have been working on flashing some code on the development kit. I would like to also flash this code on every...
Hi,
I have performed Nordic's "nRF52 SDK Application Timer Tutorial" found on this link .
I have followed everything step by step and have not encountered any build or...
Please find attached code of BLE_APP_UART code main.c file. I am using Nordic nRF51 DK board (nRF51824) for my project development.
We have created our own android apk....
I updated nrf Connect to version 1.0.6
I used the verification capability of the Getting Started Assistant to make sure all tools are up-to-date
Then I followed the...
Hello,
Just got my Thing 91 and wanted to update the application firmware on the SiP using nRF connect 3.3 .0 programmer but when connecting to the device I got the following...
Hi
The issue is that after a buttonless DFU is completed the new firmware runs as expected but the new advertised name doesn't change.
device name in firmware before DFU...
Hi Team,
Currently i'm working on Openthread Border router(Rasberrypi) with nrf52840 as a radio. I have gone through IOT SDK(Nrf5) for enabling the 6lowpan BLE Border router...
I tried to update SD + APP at the same time but it only uploads the SD. I create the zip file like this nrfutil pkg generate --hw-version 52 --application-version 1 --application...
Howdy,
I'm porting a GATT profile from a different profile where the custom services characteristics and descriptors UUIDs are malformed. For example;
1st Custom Service...
This issue exists in NRF SDK5 15.2.0 and earlier. NRF log module has entered "production" level as of SDK5 15.2.
While implementing an additional logging backend, I discovered...
